|
dev
newsgroups
|
|||||||||||||||||||||||
|
|||||||||||||||||||||||
Missing ASP.NET tab in IISHopefully someone could clear up my problem here. I'm setting up a new server (Win 2003 Standard 64-bit) for use as an Intranet server. I have 3 web apps written in asp.net - one uses .NET 2.0.50727 and two are using 1.1.4322. The Win2k3 machine came to me with .NET 2 already installed, but no IIS and no .NET 1.1 - so I installed IIS and proceeded to setup the .NET 2 web app. All went well, went to the ASP.net tab and selected the 2.0.50727 framework. Sorted. I then proceeded to install .NET 1.1 and I ran the cscript command to make IIS work with 1.1 - as requested by the installation. I go back into IIS, and my ASP.net tab has gone! I've just been reading this forum... http://www.thescripts.com/forum/threadnav431607-1-10.html ...and this kb article.. http://support.microsoft.com/default.aspx?scid=kb;en-us;894435 ...which seem to indicate that I can run a .NET 1.1 and .NET 2.0 app side by side on Win2k3 64-bit, but that it won't bring the ASP.NET tab back. Is that correct? If I switch it back to 64-bit, I won't be able to run my .NET 1.1 apps? So, if I leave it as it is... how can I get some websites to run in 1.1 and some to run in 2.0, if I don't have the ASP.NET tab to select the .NET version!? Or am I missing something?! Any help greatly appreciated. Thanks, Dan Hi again,
Just another question. If I run the commands detailed on the kb article... http://support.microsoft.com/default.aspx?scid=kb;en-us;894435 ... for .NET 1.1 and 2.0 32-bit versions (one after the other), will that bring my ASP.NET tab back!?! Thanks everyone, Dan Show quote "musosdev" wrote: > Hi everyone, > > Hopefully someone could clear up my problem here. I'm setting up a new > server (Win 2003 Standard 64-bit) for use as an Intranet server. > > I have 3 web apps written in asp.net - one uses .NET 2.0.50727 and two are > using 1.1.4322. > > The Win2k3 machine came to me with .NET 2 already installed, but no IIS and > no .NET 1.1 - so I installed IIS and proceeded to setup the .NET 2 web app. > All went well, went to the ASP.net tab and selected the 2.0.50727 framework. > Sorted. > > I then proceeded to install .NET 1.1 and I ran the cscript command to make > IIS work with 1.1 - as requested by the installation. > > I go back into IIS, and my ASP.net tab has gone! > > I've just been reading this forum... > http://www.thescripts.com/forum/threadnav431607-1-10.html > > ..and this kb article.. > http://support.microsoft.com/default.aspx?scid=kb;en-us;894435 > > ..which seem to indicate that I can run a .NET 1.1 and .NET 2.0 app side by > side on Win2k3 64-bit, but that it won't bring the ASP.NET tab back. Is that > correct? > > If I switch it back to 64-bit, I won't be able to run my .NET 1.1 apps? > > So, if I leave it as it is... how can I get some websites to run in 1.1 and > some to run in 2.0, if I don't have the ASP.NET tab to select the .NET > version!? > > Or am I missing something?! > > Any help greatly appreciated. > > Thanks, > > > > Dan I think that you only need to run "aspnet_regiis.exe -i" for each version.
Run the 1.1 version first, then the 2.0 version. I believe that your problem comes from installing 2.0 before 1.1. musosdev wrote: Show quote > Hi again, > > Just another question. If I run the commands detailed on the kb article... > http://support.microsoft.com/default.aspx?scid=kb;en-us;894435 > > .. for .NET 1.1 and 2.0 32-bit versions (one after the other), will that > bring my ASP.NET tab back!?! > > Thanks everyone, > > > Dan > > > "musosdev" wrote: > >> Hi everyone, >> >> Hopefully someone could clear up my problem here. I'm setting up a new >> server (Win 2003 Standard 64-bit) for use as an Intranet server. >> >> I have 3 web apps written in asp.net - one uses .NET 2.0.50727 and two are >> using 1.1.4322. >> >> The Win2k3 machine came to me with .NET 2 already installed, but no IIS and >> no .NET 1.1 - so I installed IIS and proceeded to setup the .NET 2 web app. >> All went well, went to the ASP.net tab and selected the 2.0.50727 framework. >> Sorted. >> >> I then proceeded to install .NET 1.1 and I ran the cscript command to make >> IIS work with 1.1 - as requested by the installation. >> >> I go back into IIS, and my ASP.net tab has gone! >> >> I've just been reading this forum... >> http://www.thescripts.com/forum/threadnav431607-1-10.html >> >> ..and this kb article.. >> http://support.microsoft.com/default.aspx?scid=kb;en-us;894435 >> >> ..which seem to indicate that I can run a .NET 1.1 and .NET 2.0 app side by >> side on Win2k3 64-bit, but that it won't bring the ASP.NET tab back. Is that >> correct? >> >> If I switch it back to 64-bit, I won't be able to run my .NET 1.1 apps? >> >> So, if I leave it as it is... how can I get some websites to run in 1.1 and >> some to run in 2.0, if I don't have the ASP.NET tab to select the .NET >> version!? >> >> Or am I missing something?! >> >> Any help greatly appreciated. >> >> Thanks, >> >> >> >> Dan Hi
K, tried running aspnet_regiis.exe -i for each version as suggested - still no asp.net tab in IIS. Any other suggestions?! Show quote "Göran Andersson" wrote: > I think that you only need to run "aspnet_regiis.exe -i" for each version. > > Run the 1.1 version first, then the 2.0 version. I believe that your > problem comes from installing 2.0 before 1.1. > > musosdev wrote: > > Hi again, > > > > Just another question. If I run the commands detailed on the kb article... > > http://support.microsoft.com/default.aspx?scid=kb;en-us;894435 > > > > .. for .NET 1.1 and 2.0 32-bit versions (one after the other), will that > > bring my ASP.NET tab back!?! > > > > Thanks everyone, > > > > > > Dan > > > > > > "musosdev" wrote: > > > >> Hi everyone, > >> > >> Hopefully someone could clear up my problem here. I'm setting up a new > >> server (Win 2003 Standard 64-bit) for use as an Intranet server. > >> > >> I have 3 web apps written in asp.net - one uses .NET 2.0.50727 and two are > >> using 1.1.4322. > >> > >> The Win2k3 machine came to me with .NET 2 already installed, but no IIS and > >> no .NET 1.1 - so I installed IIS and proceeded to setup the .NET 2 web app. > >> All went well, went to the ASP.net tab and selected the 2.0.50727 framework. > >> Sorted. > >> > >> I then proceeded to install .NET 1.1 and I ran the cscript command to make > >> IIS work with 1.1 - as requested by the installation. > >> > >> I go back into IIS, and my ASP.net tab has gone! > >> > >> I've just been reading this forum... > >> http://www.thescripts.com/forum/threadnav431607-1-10.html > >> > >> ..and this kb article.. > >> http://support.microsoft.com/default.aspx?scid=kb;en-us;894435 > >> > >> ..which seem to indicate that I can run a .NET 1.1 and .NET 2.0 app side by > >> side on Win2k3 64-bit, but that it won't bring the ASP.NET tab back. Is that > >> correct? > >> > >> If I switch it back to 64-bit, I won't be able to run my .NET 1.1 apps? > >> > >> So, if I leave it as it is... how can I get some websites to run in 1.1 and > >> some to run in 2.0, if I don't have the ASP.NET tab to select the .NET > >> version!? > >> > >> Or am I missing something?! > >> > >> Any help greatly appreciated. > >> > >> Thanks, > >> > >> > >> > >> Dan > > > -- > Göran Andersson > _____ > http://www.guffa.com > Hi
Just to let everyone know I've sorted it, with thanks from this article.. http://office.microsoft.com/en-us/winsharepointadmin/HA100598511033.aspx It explained how to associate a website with a particular .NET version using the command line - useful when the tab has gone walkabout! Thanks for your help Goran. Show quote "Göran Andersson" wrote: > I think that you only need to run "aspnet_regiis.exe -i" for each version. > > Run the 1.1 version first, then the 2.0 version. I believe that your > problem comes from installing 2.0 before 1.1. > > musosdev wrote: > > Hi again, > > > > Just another question. If I run the commands detailed on the kb article... > > http://support.microsoft.com/default.aspx?scid=kb;en-us;894435 > > > > .. for .NET 1.1 and 2.0 32-bit versions (one after the other), will that > > bring my ASP.NET tab back!?! > > > > Thanks everyone, > > > > > > Dan > > > > > > "musosdev" wrote: > > > >> Hi everyone, > >> > >> Hopefully someone could clear up my problem here. I'm setting up a new > >> server (Win 2003 Standard 64-bit) for use as an Intranet server. > >> > >> I have 3 web apps written in asp.net - one uses .NET 2.0.50727 and two are > >> using 1.1.4322. > >> > >> The Win2k3 machine came to me with .NET 2 already installed, but no IIS and > >> no .NET 1.1 - so I installed IIS and proceeded to setup the .NET 2 web app. > >> All went well, went to the ASP.net tab and selected the 2.0.50727 framework. > >> Sorted. > >> > >> I then proceeded to install .NET 1.1 and I ran the cscript command to make > >> IIS work with 1.1 - as requested by the installation. > >> > >> I go back into IIS, and my ASP.net tab has gone! > >> > >> I've just been reading this forum... > >> http://www.thescripts.com/forum/threadnav431607-1-10.html > >> > >> ..and this kb article.. > >> http://support.microsoft.com/default.aspx?scid=kb;en-us;894435 > >> > >> ..which seem to indicate that I can run a .NET 1.1 and .NET 2.0 app side by > >> side on Win2k3 64-bit, but that it won't bring the ASP.NET tab back. Is that > >> correct? > >> > >> If I switch it back to 64-bit, I won't be able to run my .NET 1.1 apps? > >> > >> So, if I leave it as it is... how can I get some websites to run in 1.1 and > >> some to run in 2.0, if I don't have the ASP.NET tab to select the .NET > >> version!? > >> > >> Or am I missing something?! > >> > >> Any help greatly appreciated. > >> > >> Thanks, > >> > >> > >> > >> Dan > > > -- > Göran Andersson > _____ > http://www.guffa.com >  |
|||||||||||||||||||||||
Other interesting topics