"eduwushu" <eduwu***@discussions.microsoft.com> wrote in message
news:C5E251D5-7D60-42FF-927D-A303AB6F5DA9@microsoft.com...
> here is another issue i found. When i try to show an openfiledialog in my
> application withh panda antivirus activated it blocks indefinitely. when i
> pause the debugging and look at the call stack i find that the last entry
> of
> the stack is about the PavSHook.dll, a dll of the panda antivirus runtime,
> i
> suppose.
> What can i do to avoid this panda issue?? : )
>
> Mnay thanks

"Michael D. Ober" wrote:

> Local or remote machine.  I suspect it's a remote machine.  If so, disable
> the Panda firewall and try again.  If that works, you need to reset the
> panda firewall and then allow your application through it.
>
> BTW:  I also use Panda 2006, but not the firewall as I've had too many
> problems with it.
>
> Mike Ober.
>
> "eduwushu" <eduwu***@discussions.microsoft.com> wrote in message
> news:C5E251D5-7D60-42FF-927D-A303AB6F5DA9@microsoft.com...
> > here is another issue i found. When i try to show an openfiledialog in my
> > application withh panda antivirus activated it blocks indefinitely. when i
> > pause the debugging and look at the call stack i find that the last entry
> > of
> > the stack is about the PavSHook.dll, a dll of the panda antivirus runtime,
> > i
> > suppose.
> > What can i do to avoid this panda issue?? : )
> >
> > Mnay thanks
>
>
>

"eduwushu" <eduwu***@discussions.microsoft.com> wrote in message
news:AD164A2B-866E-4A2A-84DD-B585A70A280C@microsoft.com...
> the open file dialog tries to see the files of the local machine where my
> application is executing. Its strange. When i call to showdialog the
> application hangs and panda dont show me any message.
> When i close panda antivirus and execute my application again  the dialog
> shows up when i push the button correctly but it goes very slow (as i
> stated
> in other discussion here)
> And yes, panda antivirus is giving me many troubles. I have also tried
> some
> time before to acces serial port and when i call SerialPort.Open() the
> application hangs too. And it was also Panda's fault.
> The annoying thing is that panda dont show me any message indicating that
> my
> program tries to access protected resources or something like that. It
> only
> hangs my application silently.
> do you know something about this?
>
> "Michael D. Ober" wrote:
>
>> Local or remote machine.  I suspect it's a remote machine.  If so,
>> disable
>> the Panda firewall and try again.  If that works, you need to reset the
>> panda firewall and then allow your application through it.
>>
>> BTW:  I also use Panda 2006, but not the firewall as I've had too many
>> problems with it.
>>
>> Mike Ober.
>>
>> "eduwushu" <eduwu***@discussions.microsoft.com> wrote in message
>> news:C5E251D5-7D60-42FF-927D-A303AB6F5DA9@microsoft.com...
>> > here is another issue i found. When i try to show an openfiledialog in
>> > my
>> > application withh panda antivirus activated it blocks indefinitely.
>> > when i
>> > pause the debugging and look at the call stack i find that the last
>> > entry
>> > of
>> > the stack is about the PavSHook.dll, a dll of the panda antivirus
>> > runtime,
>> > i
>> > suppose.
>> > What can i do to avoid this panda issue?? : )
>> >
>> > Mnay thanks
>>
>>
>>