"Adri" <a3@community.nospam> wrote in message
news:B66FF897-A249-46CC-9092-ADAA9E990C58@microsoft.com...
> I've built an localised .NET 2.0 application, which runs fine on my
> development machine. But when I deploy the app, it fails to run from an
> UNC
> path. I've already used CASPOL to add FullTrust to the UNC.
>
> The error that occurs us the following:
> System.InvalidOperationException was unhandled
>  Message="An error occurred creating the form. See
> Exception.InnerException
> for details.  The error is: Request for the permission of type
> 'System.Security.Permissions.SecurityPermission, mscorlib,
> Version=2.0.0.0,
> Culture=neutral, PublicKeyToken=b77a5c561934e089' failed."
>  Source="TMD"
>  StackTrace:
>       at TMD.My.MyProject.MyForms.Create__Instance__[T](T Instance)
>       at TMD.My.MyApplication.OnCreateSplashScreen()
>       at
> Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.ShowSplashScreen()
>       at
> Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnInitialize(ReadOnlyCollection`1
> commandLineArgs)
>       at
> Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
>       at
> Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[]
> commandLine)
>       at TMD.My.MyApplication.Main(String[] Args)
>
> It seems to happen when the app tries to show the SplashScreen
>
> --
> Adri
> Programmers do it Bit by Bit

"Norman Yuan" wrote:

> It is obviously the security/permission issue. In order to run .NET code
> from a network share, you need to
>
> 1. Give user necessary file access permission, read and execute, whether it
> is .NET file or not;
> 2. Allow .NET code from outside computer to run with CASPOL tool.
>
> Are you sure you have done both correctly? I do not see there is other
> reasons.
>
>
> "Adri" <a3@community.nospam> wrote in message
> news:B66FF897-A249-46CC-9092-ADAA9E990C58@microsoft.com...
> > I've built an localised .NET 2.0 application, which runs fine on my
> > development machine. But when I deploy the app, it fails to run from an
> > UNC
> > path. I've already used CASPOL to add FullTrust to the UNC.
> >
> > The error that occurs us the following:
> > System.InvalidOperationException was unhandled
> >  Message="An error occurred creating the form. See
> > Exception.InnerException
> > for details.  The error is: Request for the permission of type
> > 'System.Security.Permissions.SecurityPermission, mscorlib,
> > Version=2.0.0.0,
> > Culture=neutral, PublicKeyToken=b77a5c561934e089' failed."
> >  Source="TMD"
> >  StackTrace:
> >       at TMD.My.MyProject.MyForms.Create__Instance__[T](T Instance)
> >       at TMD.My.MyApplication.OnCreateSplashScreen()
> >       at
> > Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.ShowSplashScreen()
> >       at
> > Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnInitialize(ReadOnlyCollection`1
> > commandLineArgs)
> >       at
> > Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
> >       at
> > Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[]
> > commandLine)
> >       at TMD.My.MyApplication.Main(String[] Args)
> >
> > It seems to happen when the app tries to show the SplashScreen
> >
> > --
> > Adri
> > Programmers do it Bit by Bit
>
>
>

"Adri" <a3@community.nospam> wrote in message
news:980E7660-3FE8-4BD2-83C7-23465F9C3845@microsoft.com...
> Hi Norman,
>
> The user (myself) has full access (on OS level) to the UNC share.
>
> The CASPOL call is:
> caspol -q -m -ag 1.2. -url file://SERVER/Share/* FullTrust
>
> --
> Adri
> Programmers do it Bit by Bit
>
>
> "Norman Yuan" wrote:
>
>> It is obviously the security/permission issue. In order to run .NET code
>> from a network share, you need to
>>
>> 1. Give user necessary file access permission, read and execute, whether
>> it
>> is .NET file or not;
>> 2. Allow .NET code from outside computer to run with CASPOL tool.
>>
>> Are you sure you have done both correctly? I do not see there is other
>> reasons.
>>
>>
>> "Adri" <a3@community.nospam> wrote in message
>> news:B66FF897-A249-46CC-9092-ADAA9E990C58@microsoft.com...
>> > I've built an localised .NET 2.0 application, which runs fine on my
>> > development machine. But when I deploy the app, it fails to run from an
>> > UNC
>> > path. I've already used CASPOL to add FullTrust to the UNC.
>> >
>> > The error that occurs us the following:
>> > System.InvalidOperationException was unhandled
>> >  Message="An error occurred creating the form. See
>> > Exception.InnerException
>> > for details.  The error is: Request for the permission of type
>> > 'System.Security.Permissions.SecurityPermission, mscorlib,
>> > Version=2.0.0.0,
>> > Culture=neutral, PublicKeyToken=b77a5c561934e089' failed."
>> >  Source="TMD"
>> >  StackTrace:
>> >       at TMD.My.MyProject.MyForms.Create__Instance__[T](T Instance)
>> >       at TMD.My.MyApplication.OnCreateSplashScreen()
>> >       at
>> > Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.ShowSplashScreen()
>> >       at
>> > Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnInitialize(ReadOnlyCollection`1
>> > commandLineArgs)
>> >       at
>> > Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
>> >       at
>> > Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[]
>> > commandLine)
>> >       at TMD.My.MyApplication.Main(String[] Args)
>> >
>> > It seems to happen when the app tries to show the SplashScreen
>> >
>> > --
>> > Adri
>> > Programmers do it Bit by Bit
>>
>>
>>

"Norman Yuan" wrote:

> I usually do this (to give permission to run .NET code from a network share
> on our LAN) by using .NET Framework Configuration console in "Control
> Panel->Administrative Tools" and it always workd. Can you try that, instead
> of CASPOL.exe at  command line? (Although the result should be the same, if
> you do it correctly.) Just give it a try to prove you did it correctly with
> caspol.exe command line.
>
> If you have not done that in .NET framework configuration console, following
> these steps:
>
> 1. Open "Control Panel->Administrative Tools->.NET Framework 2.0
> Configuration";
> 2. Select node "Console Root->.Net Framework 2.0 Configuration->My
> Computer->Runtime Security Policy->Machine->Code Groups->All_Code" and
> right-click, select "New...";
> 3. Select "Create a new code group" radio button and enter code group name
> of your choice; click "Next";
> 4. In dropdown list, choose "URL" and enter URL (such as
> file://theserver/theshare/myCodeFolder/*); click "Next";
> 5. Select a existing permission set, such as "FullTrust"; click "Next" and
> then "Finish".
>
> Now test your app. It should work (It work on a few of my Win form apps,
> including .NET1.1 and 2.0 apps)
>
>
> "Adri" <a3@community.nospam> wrote in message
> news:980E7660-3FE8-4BD2-83C7-23465F9C3845@microsoft.com...
> > Hi Norman,
> >
> > The user (myself) has full access (on OS level) to the UNC share.
> >
> > The CASPOL call is:
> > caspol -q -m -ag 1.2. -url file://SERVER/Share/* FullTrust
> >
> > --
> > Adri
> > Programmers do it Bit by Bit
> >
> >
> > "Norman Yuan" wrote:
> >
> >> It is obviously the security/permission issue. In order to run .NET code
> >> from a network share, you need to
> >>
> >> 1. Give user necessary file access permission, read and execute, whether
> >> it
> >> is .NET file or not;
> >> 2. Allow .NET code from outside computer to run with CASPOL tool.
> >>
> >> Are you sure you have done both correctly? I do not see there is other
> >> reasons.
> >>
> >>
> >> "Adri" <a3@community.nospam> wrote in message
> >> news:B66FF897-A249-46CC-9092-ADAA9E990C58@microsoft.com...
> >> > I've built an localised .NET 2.0 application, which runs fine on my
> >> > development machine. But when I deploy the app, it fails to run from an
> >> > UNC
> >> > path. I've already used CASPOL to add FullTrust to the UNC.
> >> >
> >> > The error that occurs us the following:
> >> > System.InvalidOperationException was unhandled
> >> >  Message="An error occurred creating the form. See
> >> > Exception.InnerException
> >> > for details.  The error is: Request for the permission of type
> >> > 'System.Security.Permissions.SecurityPermission, mscorlib,
> >> > Version=2.0.0.0,
> >> > Culture=neutral, PublicKeyToken=b77a5c561934e089' failed."
> >> >  Source="TMD"
> >> >  StackTrace:
> >> >       at TMD.My.MyProject.MyForms.Create__Instance__[T](T Instance)
> >> >       at TMD.My.MyApplication.OnCreateSplashScreen()
> >> >       at
> >> > Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.ShowSplashScreen()
> >> >       at
> >> > Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnInitialize(ReadOnlyCollection`1
> >> > commandLineArgs)
> >> >       at
> >> > Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
> >> >       at
> >> > Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[]
> >> > commandLine)
> >> >       at TMD.My.MyApplication.Main(String[] Args)
> >> >
> >> > It seems to happen when the app tries to show the SplashScreen
> >> >
> >> > --
> >> > Adri
> >> > Programmers do it Bit by Bit
> >>
> >>
> >>
>
>
>

"Kevin Yu [MSFT]" wrote:

> Hi Adri,
>
> Please try to grant FullTrust permission to Intranet on the machine that
> runs the code to see if this can work.
>
> Kevin Yu
> Microsoft Online Community Support
>
> ==================================================
> Get notification to my posts through email? Please refer to
> http://msdn.microsoft.com/subscriptions/managednewsgroups/default.aspx#notif
> ications.
> Note: The MSDN Managed Newsgroup support offering is for non-urgent issues
> where an initial response from the community or a Microsoft Support
> Engineer within 1 business day is acceptable. Please note that each follow
> up response may take approximately 2 business days as the support
> professional working with you may need further investigation to reach the
> most efficient resolution. The offering is not appropriate for situations
> that require urgent, real-time or phone-based interactions or complex
> project analysis and dump analysis issues. Issues of this nature are best
> handled working with a dedicated Microsoft Support Engineer by contacting
> Microsoft Customer Support Services (CSS) at
> http://msdn.microsoft.com/subscriptions/support/default.aspx.
> ==================================================
>
> (This posting is provided "AS IS", with no warranties, and confers no
> rights.)
>
>

"Kevin Yu [MSFT]" wrote:

> Hi Adri,
>
> This is really weird. Based on the stack trace, it fails at the beginning
> when splash screen shows. Are you doing anything special on the splash
> screen showing? For example, are your writing to some file, while you don't
> have permission writing to that shared folder? Please also try to give full
> control of that UNC to your account.
>
> Kevin Yu
> Microsoft Online Community Support
> ==================================================
>
> (This posting is provided "AS IS", with no warranties, and confers no
> rights.)
>
>

"Kevin Yu [MSFT]" wrote:

> Hi Adri,
>
> Thanks for your repro code. I tried to run the app on serveral computers
> that has only .NET framework 2.0 installed.
>
> At the beginning, when I run the .exe directly from the UNC path, the app
> crashed as desired. But after the .cmd is executed, the app loads OK.
>
> Is the directory file://devnov/TrademarkDirectory/ containing TMD.exe file
> directly?
>
> Kevin Yu
> Microsoft Online Community Support
> ==================================================
>
> (This posting is provided "AS IS", with no warranties, and confers no
> rights.)
>
>

"Kevin Yu [MSFT]" wrote:

> Hi Adri,
>
> Could you also try to check the minimum grand set of permission your
> TMD.EXE requires. The following Permission Calculator tools can do it for
> you.
>
> http://msdn2.microsoft.com/en-us/library/ms165077.aspx
>
> I used
>
> permcalc -sandbox tmd.exe
>
> on my machine and it returns the following.
>
>   <?xml version="1.0" ?>
>  <Sandbox>
>  <PermissionSet version="1" class="System.Security.PermissionSet">
>   <IPermission version="1"
> class="System.Security.Permissions.EnvironmentPermission, mscorlib,
> Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
> Unrestricted="true" />
>   <IPermission version="1"
> class="System.Security.Permissions.FileIOPermission, mscorlib,
> Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
> Unrestricted="true" />
>   <IPermission version="1"
> class="System.Security.Permissions.ReflectionPermission, mscorlib,
> Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
> Unrestricted="true" />
>   <IPermission version="1"
> class="System.Security.Permissions.RegistryPermission, mscorlib,
> Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
> Unrestricted="true" />
>   <IPermission version="1"
> class="System.Security.Permissions.SecurityPermission, mscorlib,
> Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
> Flags="UnmanagedCode, Execution, ControlEvidence, ControlPrincipal,
> ControlAppDomain" />
>   <IPermission Window="AllWindows" Clipboard="OwnClipboard" version="1"
> class="System.Security.Permissions.UIPermission, mscorlib, Version=2.0.0.0,
> Culture=neutral, PublicKeyToken=b77a5c561934e089" />
>   <IPermission version="1"
> class="System.Security.Permissions.KeyContainerPermission, mscorlib,
> Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
> Unrestricted="true" />
>   <IPermission version="1"
> class="System.Data.SqlClient.SqlClientPermission, System.Data,
> Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
> Unrestricted="true" />
>   <IPermission version="1" class="System.Diagnostics.EventLogPermission,
> System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
> Unrestricted="true" />
>   </PermissionSet>
>   </Sandbox>
>
> Please check if these permission sets are met. If not, add them.
>
> If that still doesn't work, you can also add a strong name key to the .exe
> file and make the machine trust the key instead of trusting the shared
> folder.
>
> Please let me know the results after you try it.
>
> Kevin Yu
> Microsoft Online Community Support
>
> ==================================================
> Get notification to my posts through email? Please refer to
> http://msdn.microsoft.com/subscriptions/managednewsgroups/default.aspx#notif
> ications.
> Note: The MSDN Managed Newsgroup support offering is for non-urgent issues
> where an initial response from the community or a Microsoft Support
> Engineer within 1 business day is acceptable. Please note that each follow
> up response may take approximately 2 business days as the support
> professional working with you may need further investigation to reach the
> most efficient resolution. The offering is not appropriate for situations
> that require urgent, real-time or phone-based interactions or complex
> project analysis and dump analysis issues. Issues of this nature are best
> handled working with a dedicated Microsoft Support Engineer by contacting
> Microsoft Customer Support Services (CSS) at
> http://msdn.microsoft.com/subscriptions/support/default.aspx.
> ==================================================
>
> (This posting is provided "AS IS", with no warranties, and confers no
> rights.)
>
>

"Kevin Yu [MSFT]" wrote:

> Hi Adri,
>
> It seems that this site is in the different zone. Have you ever added this
> site to trusted zone? Please check it in the internet settings.
>
> Kevin Yu
> Microsoft Online Community Support
>
> ==================================================
>
>
> (This posting is provided "AS IS", with no warranties, and confers no
> rights.)
>
>

"Kevin Yu [MSFT]" <v-k***@online.microsoft.com> wrote in message
news:JOL$UOSsGHA.2504@TK2MSFTNGXA01.phx.gbl...
> Hi Adri,
>
> Please try to grant FullTrust permission to Intranet on the machine that
> runs the code to see if this can work.
>
> Kevin Yu
> Microsoft Online Community Support
>
> ==================================================
> Get notification to my posts through email? Please refer to
> http://msdn.microsoft.com/subscriptions/managednewsgroups/default.aspx#notif
> ications.
> Note: The MSDN Managed Newsgroup support offering is for non-urgent issues
> where an initial response from the community or a Microsoft Support
> Engineer within 1 business day is acceptable. Please note that each follow
> up response may take approximately 2 business days as the support
> professional working with you may need further investigation to reach the
> most efficient resolution. The offering is not appropriate for situations
> that require urgent, real-time or phone-based interactions or complex
> project analysis and dump analysis issues. Issues of this nature are best
> handled working with a dedicated Microsoft Support Engineer by contacting
> Microsoft Customer Support Services (CSS) at
> http://msdn.microsoft.com/subscriptions/support/default.aspx.
> ==================================================
>
> (This posting is provided "AS IS", with no warranties, and confers no
> rights.)
>

"Adri" <a3@community.nospam> wrote in message
news:7E10A6A6-2E91-4E7F-B16E-D8BD98A5BE05@microsoft.com...
> Hi Norman,
>
> The target machine has only the .NET 2.0 Runtime installed, and therefor
> there is no ".NET Framework 2.0 Configuration" available on the
> "Administrative Tools". That's why I used CASPOL
>
> --
> Adri
> Programmers do it Bit by Bit
>
>
> "Norman Yuan" wrote:
>
>> I usually do this (to give permission to run .NET code from a network
>> share
>> on our LAN) by using .NET Framework Configuration console in "Control
>> Panel->Administrative Tools" and it always workd. Can you try that,
>> instead
>> of CASPOL.exe at  command line? (Although the result should be the same,
>> if
>> you do it correctly.) Just give it a try to prove you did it correctly
>> with
>> caspol.exe command line.
>>
>> If you have not done that in .NET framework configuration console,
>> following
>> these steps:
>>
>> 1. Open "Control Panel->Administrative Tools->.NET Framework 2.0
>> Configuration";
>> 2. Select node "Console Root->.Net Framework 2.0 Configuration->My
>> Computer->Runtime Security Policy->Machine->Code Groups->All_Code" and
>> right-click, select "New...";
>> 3. Select "Create a new code group" radio button and enter code group
>> name
>> of your choice; click "Next";
>> 4. In dropdown list, choose "URL" and enter URL (such as
>> file://theserver/theshare/myCodeFolder/*); click "Next";
>> 5. Select a existing permission set, such as "FullTrust"; click "Next"
>> and
>> then "Finish".
>>
>> Now test your app. It should work (It work on a few of my Win form apps,
>> including .NET1.1 and 2.0 apps)
>>
>>
>> "Adri" <a3@community.nospam> wrote in message
>> news:980E7660-3FE8-4BD2-83C7-23465F9C3845@microsoft.com...
>> > Hi Norman,
>> >
>> > The user (myself) has full access (on OS level) to the UNC share.
>> >
>> > The CASPOL call is:
>> > caspol -q -m -ag 1.2. -url file://SERVER/Share/* FullTrust
>> >
>> > --
>> > Adri
>> > Programmers do it Bit by Bit
>> >
>> >
>> > "Norman Yuan" wrote:
>> >
>> >> It is obviously the security/permission issue. In order to run .NET
>> >> code
>> >> from a network share, you need to
>> >>
>> >> 1. Give user necessary file access permission, read and execute,
>> >> whether
>> >> it
>> >> is .NET file or not;
>> >> 2. Allow .NET code from outside computer to run with CASPOL tool.
>> >>
>> >> Are you sure you have done both correctly? I do not see there is other
>> >> reasons.
>> >>
>> >>
>> >> "Adri" <a3@community.nospam> wrote in message
>> >> news:B66FF897-A249-46CC-9092-ADAA9E990C58@microsoft.com...
>> >> > I've built an localised .NET 2.0 application, which runs fine on my
>> >> > development machine. But when I deploy the app, it fails to run from
>> >> > an
>> >> > UNC
>> >> > path. I've already used CASPOL to add FullTrust to the UNC.
>> >> >
>> >> > The error that occurs us the following:
>> >> > System.InvalidOperationException was unhandled
>> >> >  Message="An error occurred creating the form. See
>> >> > Exception.InnerException
>> >> > for details.  The error is: Request for the permission of type
>> >> > 'System.Security.Permissions.SecurityPermission, mscorlib,
>> >> > Version=2.0.0.0,
>> >> > Culture=neutral, PublicKeyToken=b77a5c561934e089' failed."
>> >> >  Source="TMD"
>> >> >  StackTrace:
>> >> >       at TMD.My.MyProject.MyForms.Create__Instance__[T](T Instance)
>> >> >       at TMD.My.MyApplication.OnCreateSplashScreen()
>> >> >       at
>> >> > Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.ShowSplashScreen()
>> >> >       at
>> >> > Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnInitialize(ReadOnlyCollection`1
>> >> > commandLineArgs)
>> >> >       at
>> >> > Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
>> >> >       at
>> >> > Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[]
>> >> > commandLine)
>> >> >       at TMD.My.MyApplication.Main(String[] Args)
>> >> >
>> >> > It seems to happen when the app tries to show the SplashScreen
>> >> >
>> >> > --
>> >> > Adri
>> >> > Programmers do it Bit by Bit
>> >>
>> >>
>> >>
>>
>>
>>