"Roland Giesler" <rol***@giesler.za.net.nospam> wrote in message
news:#P$nS6I#EHA.3592@TK2MSFTNGP09.phx.gbl...
> I have an CS app that I had to re-install after rebuilding a server, but
> can't get it to run.  It's a C# .net web application, which accesses a SQL
> server DB.  When the page is loaded it crashes in a file .\Dominican\Web
> References\Users\Reference.cs.  This file is auto created by Visual Studio
> and has a number of calls implemented, "GetAuthenticatedUserData" being
the
> one that is not found, so IIS gives the error 404.
>
> My env is Windows 2000 AS, with SQL Server EE, MDAC 2.8, .Net FW 1.1 with
> all service packs installed and all patches loaded.
>
> This app ran before, all the files are there, the two applications
> (dominican.dll and docinicanservices.dll) are both installed as
applications
> in IIS.
>
> I've attached screenshots of the IIS config, just to give a better picture
> of what the setup looks like.
>
> The Code that doesn't run is in the reference.cs file, line 37.
>
> Question: Is there something else I have to load, register, install, etc
to
> get these calls to be succesful. It seems it's in system.web.services.
where
> this is located, but I cannot find this?
>
> Thanks
>
> Roland
>
>
>
>
>

"Roland Giesler" <rol***@giesler.za.net.nospam> wrote in message
news:%23d76o0M%23EHA.1084@tk2msftngp13.phx.gbl...
>
> "Roland Giesler" <rol***@giesler.za.net.nospam> wrote in message
> news:#P$nS6I#EHA.3592@TK2MSFTNGP09.phx.gbl...
> > I have an CS app that I had to re-install after rebuilding a server, but
> > can't get it to run.  It's a C# .net web application, which accesses a
SQL
> > server DB.  When the page is loaded it crashes in a file .\Dominican\Web
> > References\Users\Reference.cs.  This file is auto created by Visual
Studio
> > and has a number of calls implemented, "GetAuthenticatedUserData" being
> the
> > one that is not found, so IIS gives the error 404.
> >
> > My env is Windows 2000 AS, with SQL Server EE, MDAC 2.8, .Net FW 1.1
with
> > all service packs installed and all patches loaded.
> >
> > This app ran before, all the files are there, the two applications
> > (dominican.dll and docinicanservices.dll) are both installed as
> applications
> > in IIS.
> >
> > I've attached screenshots of the IIS config, just to give a better
picture
> > of what the setup looks like.
> >
> > The Code that doesn't run is in the reference.cs file, line 37.
> >
> > Question: Is there something else I have to load, register, install, etc
> to
> > get these calls to be succesful. It seems it's in system.web.services.
> where
> > this is located, but I cannot find this?
> >
> > Thanks
> >
> > Roland
> >
> >
> >
> >
> >
>
>

"Nick Malik [Microsoft]" <nickmalik@hotmail.nospam.com> wrote in message
news:8K6dnei4HKIIp3vcRVn-oQ@comcast.com...
> you may need to reregister ASP.NET.
>
> see http://support.microsoft.com/default.aspx?scid=kb;en-us;306005
>
> --
> --- Nick Malik [Microsoft]
>     MCSD, CFPS, Certified Scrummaster
>     http://blogs.msdn.com/nickmalik
>
> Disclaimer: Opinions expressed in this forum are my own, and not
> representative of my employer.
>    I do not answer questions on behalf of my employer.  I'm just a
> programmer helping programmers.
> --
> "Roland Giesler" <rol***@giesler.za.net.nospam> wrote in message
> news:%23d76o0M%23EHA.1084@tk2msftngp13.phx.gbl...
> >
> > "Roland Giesler" <rol***@giesler.za.net.nospam> wrote in message
> > news:#P$nS6I#EHA.3592@TK2MSFTNGP09.phx.gbl...
> > > I have an CS app that I had to re-install after rebuilding a server,
but
> > > can't get it to run.  It's a C# .net web application, which accesses a
> SQL
> > > server DB.  When the page is loaded it crashes in a file
..\Dominican\Web
> > > References\Users\Reference.cs.  This file is auto created by Visual
> Studio
> > > and has a number of calls implemented, "GetAuthenticatedUserData"
being
> > the
> > > one that is not found, so IIS gives the error 404.
> > >
> > > My env is Windows 2000 AS, with SQL Server EE, MDAC 2.8, .Net FW 1.1
> with
> > > all service packs installed and all patches loaded.
> > >
> > > This app ran before, all the files are there, the two applications
> > > (dominican.dll and docinicanservices.dll) are both installed as
> > applications
> > > in IIS.
> > >
> > > I've attached screenshots of the IIS config, just to give a better
> picture
> > > of what the setup looks like.
> > >
> > > The Code that doesn't run is in the reference.cs file, line 37.
> > >
> > > Question: Is there something else I have to load, register, install,
etc
> > to
> > > get these calls to be succesful. It seems it's in system.web.services.
> > where
> > > this is located, but I cannot find this?
> > >
> > > Thanks
> > >
> > > Roland
> > >
> > >
> > >
> > >
> > >
> >
> >
>
>

"Roland Giesler" <rol***@giesler.za.net.nospam> wrote in message
news:%23$Tzd8h%23EHA.2608@TK2MSFTNGP10.phx.gbl...
> Nick, I did what you suggested, but it makes not difference.
> Have a look at what someone elsewhere suggested and what I reported
>
> > Make sure you can browse
> http://localhost/Dominican/DominicanServices/Users.asmx...
> > If not create an virtual directory name [Dominican] on your IIS and
point
> it to your project
> > and browse it again...
>
> > Also make sure you are able to browse
> http://tempuri.org/GetAuthenticatedUserData from the server.
>
> I  can both browse http://tempuri.org/GetAuthenticatedUserData and
> http://localhost/Dominican/DominicanServices/Users.asmx.  If I click
> GetAuthenticatedUserData on the users page, it's prompts me for the three
> parameters required by the web service.  It all appears 100% correct.
>
> Any other things I can check?
>
> Roland
>
>
> "Nick Malik [Microsoft]" <nickmalik@hotmail.nospam.com> wrote in message
> news:8K6dnei4HKIIp3vcRVn-oQ@comcast.com...
> > you may need to reregister ASP.NET.
> >
> > see http://support.microsoft.com/default.aspx?scid=kb;en-us;306005
> >
> > --
> > --- Nick Malik [Microsoft]
> >     MCSD, CFPS, Certified Scrummaster
> >     http://blogs.msdn.com/nickmalik
> >
> > Disclaimer: Opinions expressed in this forum are my own, and not
> > representative of my employer.
> >    I do not answer questions on behalf of my employer.  I'm just a
> > programmer helping programmers.
> > --
> > "Roland Giesler" <rol***@giesler.za.net.nospam> wrote in message
> > news:%23d76o0M%23EHA.1084@tk2msftngp13.phx.gbl...
> > >
> > > "Roland Giesler" <rol***@giesler.za.net.nospam> wrote in message
> > > news:#P$nS6I#EHA.3592@TK2MSFTNGP09.phx.gbl...
> > > > I have an CS app that I had to re-install after rebuilding a server,
> but
> > > > can't get it to run.  It's a C# .net web application, which accesses
a
> > SQL
> > > > server DB.  When the page is loaded it crashes in a file
> .\Dominican\Web
> > > > References\Users\Reference.cs.  This file is auto created by Visual
> > Studio
> > > > and has a number of calls implemented, "GetAuthenticatedUserData"
> being
> > > the
> > > > one that is not found, so IIS gives the error 404.
> > > >
> > > > My env is Windows 2000 AS, with SQL Server EE, MDAC 2.8, .Net FW 1.1
> > with
> > > > all service packs installed and all patches loaded.
> > > >
> > > > This app ran before, all the files are there, the two applications
> > > > (dominican.dll and docinicanservices.dll) are both installed as
> > > applications
> > > > in IIS.
> > > >
> > > > I've attached screenshots of the IIS config, just to give a better
> > picture
> > > > of what the setup looks like.
> > > >
> > > > The Code that doesn't run is in the reference.cs file, line 37.
> > > >
> > > > Question: Is there something else I have to load, register, install,
> etc
> > > to
> > > > get these calls to be succesful. It seems it's in

> > > where
> > > > this is located, but I cannot find this?
> > > >
> > > > Thanks
> > > >
> > > > Roland
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

"Nick Malik [Microsoft]" <nickmalik@hotmail.nospam.com> wrote in message
news:D-6dnbjZ0qz6RXrcRVn-jA@comcast.com...
> Your app is calling a web service.  It cannot find the web service,
probably
> because the app's web.config file should be set to point at it, and you
have
> not modified the web.config appropriately.
>
> It is possible that the developer didn't code the application correctly,
and
> it is not referring to a web.config file to get the URL of the web
service.
> In that case, you will probably need to make sure that the virtual
directory
> that contains the web service has the same name as the application expects
> it to have.

>
> --
> --- Nick Malik [Microsoft]
>     MCSD, CFPS, Certified Scrummaster
>     http://blogs.msdn.com/nickmalik
>
> Disclaimer: Opinions expressed in this forum are my own, and not
> representative of my employer.
>    I do not answer questions on behalf of my employer.  I'm just a
> programmer helping programmers.
> --
> "Roland Giesler" <rol***@giesler.za.net.nospam> wrote in message
> news:%23$Tzd8h%23EHA.2608@TK2MSFTNGP10.phx.gbl...
> > Nick, I did what you suggested, but it makes not difference.
> > Have a look at what someone elsewhere suggested and what I reported
> >
> > > Make sure you can browse
> > http://localhost/Dominican/DominicanServices/Users.asmx...
> > > If not create an virtual directory name [Dominican] on your IIS and
> point
> > it to your project
> > > and browse it again...
> >
> > > Also make sure you are able to browse
> > http://tempuri.org/GetAuthenticatedUserData from the server.
> >
> > I  can both browse http://tempuri.org/GetAuthenticatedUserData and
> > http://localhost/Dominican/DominicanServices/Users.asmx.  If I click
> > GetAuthenticatedUserData on the users page, it's prompts me for the
three
> > parameters required by the web service.  It all appears 100% correct.
> >
> > Any other things I can check?
> >
> > Roland
> >
> >
> > "Nick Malik [Microsoft]" <nickmalik@hotmail.nospam.com> wrote in message
> > news:8K6dnei4HKIIp3vcRVn-oQ@comcast.com...
> > > you may need to reregister ASP.NET.
> > >
> > > see http://support.microsoft.com/default.aspx?scid=kb;en-us;306005
> > >
> > > --
> > > --- Nick Malik [Microsoft]
> > >     MCSD, CFPS, Certified Scrummaster
> > >     http://blogs.msdn.com/nickmalik
> > >
> > > Disclaimer: Opinions expressed in this forum are my own, and not
> > > representative of my employer.
> > >    I do not answer questions on behalf of my employer.  I'm just a
> > > programmer helping programmers.
> > > --
> > > "Roland Giesler" <rol***@giesler.za.net.nospam> wrote in message
> > > news:%23d76o0M%23EHA.1084@tk2msftngp13.phx.gbl...
> > > >
> > > > "Roland Giesler" <rol***@giesler.za.net.nospam> wrote in message
> > > > news:#P$nS6I#EHA.3592@TK2MSFTNGP09.phx.gbl...
> > > > > I have an CS app that I had to re-install after rebuilding a
server,
> > but
> > > > > can't get it to run.  It's a C# .net web application, which
accesses
> a
> > > SQL
> > > > > server DB.  When the page is loaded it crashes in a file
> > .\Dominican\Web
> > > > > References\Users\Reference.cs.  This file is auto created by
Visual
> > > Studio
> > > > > and has a number of calls implemented, "GetAuthenticatedUserData"
> > being
> > > > the
> > > > > one that is not found, so IIS gives the error 404.
> > > > >
> > > > > My env is Windows 2000 AS, with SQL Server EE, MDAC 2.8, .Net FW
1.1
> > > with
> > > > > all service packs installed and all patches loaded.
> > > > >
> > > > > This app ran before, all the files are there, the two applications
> > > > > (dominican.dll and docinicanservices.dll) are both installed as
> > > > applications
> > > > > in IIS.
> > > > >
> > > > > I've attached screenshots of the IIS config, just to give a better
> > > picture
> > > > > of what the setup looks like.
> > > > >
> > > > > The Code that doesn't run is in the reference.cs file, line 37.
> > > > >
> > > > > Question: Is there something else I have to load, register,
install,
> > etc
> > > > to
> > > > > get these calls to be succesful. It seems it's in
> system.web.services.
> > > > where
> > > > > this is located, but I cannot find this?
> > > > >
> > > > > Thanks
> > > > >
> > > > > Roland
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

"Roland Giesler" <rol***@giesler.za.net.nospam> wrote in message
news:eTm8All%23EHA.2180@TK2MSFTNGP10.phx.gbl...
> "Nick Malik [Microsoft]" <nickmalik@hotmail.nospam.com> wrote in message
> news:D-6dnbjZ0qz6RXrcRVn-jA@comcast.com...
> > Your app is calling a web service.  It cannot find the web service,
> probably
> > because the app's web.config file should be set to point at it, and you
> have
> > not modified the web.config appropriately.
> >
> > It is possible that the developer didn't code the application correctly,
> and
> > it is not referring to a web.config file to get the URL of the web
> service.
> > In that case, you will probably need to make sure that the virtual
> directory
> > that contains the web service has the same name as the application
expects
> > it to have.
> You're right, the developer hardcoded the path, but I have spoken to him
at
> length and insists all the paths are correct.  He doesn't know why it
> doesn't work now, since it did before.
>
> >
> > BTW: I don't know why anyone would suggest that you browse anything at
> > tempuri.org... it's a fake address.  I don't know how or why you made it
> > work, because you say that it does work.  It shouldn't work.
> The URL resolves and shows a web page with informaiton about namespaces,
so
> it resolves, but I understand that it's just there for humans reading it,
> not for computers software to actualy access.
>
> I'm re-installing the server at the moment, hoping that somehow I can
solve
> the problem.  I've had very few responses on the topic both on newsgroups
> and web support  forums.
>
> Regards
>
> Roland
>
> >
> > --
> > --- Nick Malik [Microsoft]
> >     MCSD, CFPS, Certified Scrummaster
> >     http://blogs.msdn.com/nickmalik
> >
> > Disclaimer: Opinions expressed in this forum are my own, and not
> > representative of my employer.
> >    I do not answer questions on behalf of my employer.  I'm just a
> > programmer helping programmers.
> > --
> > "Roland Giesler" <rol***@giesler.za.net.nospam> wrote in message
> > news:%23$Tzd8h%23EHA.2608@TK2MSFTNGP10.phx.gbl...
> > > Nick, I did what you suggested, but it makes not difference.
> > > Have a look at what someone elsewhere suggested and what I reported
> > >
> > > > Make sure you can browse
> > > http://localhost/Dominican/DominicanServices/Users.asmx...
> > > > If not create an virtual directory name [Dominican] on your IIS and
> > point
> > > it to your project
> > > > and browse it again...
> > >
> > > > Also make sure you are able to browse
> > > http://tempuri.org/GetAuthenticatedUserData from the server.
> > >
> > > I  can both browse http://tempuri.org/GetAuthenticatedUserData and
> > > http://localhost/Dominican/DominicanServices/Users.asmx.  If I click
> > > GetAuthenticatedUserData on the users page, it's prompts me for the
> three
> > > parameters required by the web service.  It all appears 100% correct.
> > >
> > > Any other things I can check?
> > >
> > > Roland
> > >
> > >
> > > "Nick Malik [Microsoft]" <nickmalik@hotmail.nospam.com> wrote in
message
> > > news:8K6dnei4HKIIp3vcRVn-oQ@comcast.com...
> > > > you may need to reregister ASP.NET.
> > > >
> > > > see http://support.microsoft.com/default.aspx?scid=kb;en-us;306005
> > > >
> > > > --
> > > > --- Nick Malik [Microsoft]
> > > >     MCSD, CFPS, Certified Scrummaster
> > > >     http://blogs.msdn.com/nickmalik
> > > >
> > > > Disclaimer: Opinions expressed in this forum are my own, and not
> > > > representative of my employer.
> > > >    I do not answer questions on behalf of my employer.  I'm just a
> > > > programmer helping programmers.
> > > > --
> > > > "Roland Giesler" <rol***@giesler.za.net.nospam> wrote in message
> > > > news:%23d76o0M%23EHA.1084@tk2msftngp13.phx.gbl...
> > > > >
> > > > > "Roland Giesler" <rol***@giesler.za.net.nospam> wrote in message
> > > > > news:#P$nS6I#EHA.3592@TK2MSFTNGP09.phx.gbl...
> > > > > > I have an CS app that I had to re-install after rebuilding a
> server,
> > > but
> > > > > > can't get it to run.  It's a C# .net web application, which
> accesses
> > a
> > > > SQL
> > > > > > server DB.  When the page is loaded it crashes in a file
> > > .\Dominican\Web
> > > > > > References\Users\Reference.cs.  This file is auto created by
> Visual
> > > > Studio
> > > > > > and has a number of calls implemented,
"GetAuthenticatedUserData"
> > > being
> > > > > the
> > > > > > one that is not found, so IIS gives the error 404.
> > > > > >
> > > > > > My env is Windows 2000 AS, with SQL Server EE, MDAC 2.8, .Net FW
> 1.1
> > > > with
> > > > > > all service packs installed and all patches loaded.
> > > > > >
> > > > > > This app ran before, all the files are there, the two
applications
> > > > > > (dominican.dll and docinicanservices.dll) are both installed as
> > > > > applications
> > > > > > in IIS.
> > > > > >
> > > > > > I've attached screenshots of the IIS config, just to give a
better
> > > > picture
> > > > > > of what the setup looks like.
> > > > > >
> > > > > > The Code that doesn't run is in the reference.cs file, line 37.
> > > > > >
> > > > > > Question: Is there something else I have to load, register,
> install,
> > > etc
> > > > > to
> > > > > > get these calls to be succesful. It seems it's in
> > system.web.services.
> > > > > where
> > > > > > this is located, but I cannot find this?
> > > > > >
> > > > > > Thanks
> > > > > >
> > > > > > Roland
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

"Nick Malik [Microsoft]" <nickmalik@hotmail.nospam.com> wrote in message
news:f9udnY4goNBC1HTcRVn-ig@comcast.com...
> hello Roland,
>
> can you get the developer to fix his app so that it refers to the config
> file for the URL of the web service?
>
> It is a simple change to make.  In every place in the code (on the calling
> side) where you create an object of the types exposed by the web service,
> you insert a single line of code:
>
>    MyWebObject wo = new MyWebObject();
>
>    wo.Url = ConfigurationSettings.AppSettings["WebServicePath"];   // <--
> the new line to be added
>
>    wo.CallTheMethodNow(yada,yada,yada);
>
> --
> --- Nick Malik [Microsoft]
>     MCSD, CFPS, Certified Scrummaster
>     http://blogs.msdn.com/nickmalik

"Roland Giesler" <rol***@giesler.za.net.nospam> wrote in message
news:u7R8CV7#EHA.2112@TK2MSFTNGP14.phx.gbl...
> Since the developer has left the company, I can make the changes myself.
> I'm actuially here continue development of this app and it's database, but
> first it has to run properly in it's current form, something that has
eluded
> me this far.... :-(
>
> I'll mail you as soon as I'm made the change.
>
> regards,
> Roland
>
> "Nick Malik [Microsoft]" <    > wrote in message
> news:f9udnY4goNBC1HTcRVn-ig@comcast.com...
> > hello Roland,
> >
> > can you get the developer to fix his app so that it refers to the config
> > file for the URL of the web service?
> >
> > It is a simple change to make.  In every place in the code (on the
calling
> > side) where you create an object of the types exposed by the web
service,
> > you insert a single line of code:
> >
> >    MyWebObject wo = new MyWebObject();
> >
> >    wo.Url = ConfigurationSettings.AppSettings["WebServicePath"];   //
<--
> > the new line to be added
> >
> >    wo.CallTheMethodNow(yada,yada,yada);
> >
> > --
> > --- Nick Malik [Microsoft]
> >     MCSD, CFPS, Certified Scrummaster
> >     http://blogs.msdn.com/nickmalik
>
>