|
dev
newsgroups
|
|||||||||||||||||||||||
|
|||||||||||||||||||||||
Hit Counter not WorkingIIS6 Windows 2003 R2 Standard DC Server SP2 Windows XP Pro SP3 Just designed a simple default page Two buttons with a hyper link and Hit Counter This was designed on my Windows XP Pro pc with my FP 2003, Then I published the site on my IIS6 Server When I bring up the web site the hit counter has a RED X What can I be missing ? I have IIS5 on my pc and it fails there also What am I doing wrong? Thanks Tom Are you http publishing (not FTP) to a server with the FP server extensions
installed? -- Show quoteHide quoteTom [Pepper] Willett Microsoft MVP - FrontPage --------------------------- "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message news:%23d$m3RYhJHA.5000@TK2MSFTNGP04.phx.gbl... : Front Page 2003 SP3 : IIS6 Windows 2003 R2 Standard DC Server SP2 : Windows XP Pro SP3 : : Just designed a simple default page : : Two buttons with a hyper link and : Hit Counter : : This was designed on my Windows XP Pro pc with my FP 2003, Then I published : the site on my IIS6 Server : : When I bring up the web site the hit counter has a RED X : : What can I be missing ? : : I have IIS5 on my pc and it fails there also : : What am I doing wrong? : : Thanks : : Tom : : Tom
I used the folder option to publish and the FP server extensions are installed on the IIS6 server. Is there any way to check to make sure the FP extensions are installed. I just went into control panal add/remove Microsoft then details on IIS and FP extensions are checked. I even did a IIS reset on the IIS6 server I looked in the folder _vti_cnf and the file default.htm.cnt file exists somewhere I read something about this folder needs ISUR_SERVER1 user with write permissions is that correct? I tried to give ISUR_SERVER1 user write permissions but the write persmission box is greyed out under the Deny column I checked the write box but not sure if the deny is taking over. ANy other ideas? thanks Tom Show quoteHide quote "Tom [Pepper] Willett" <t**@youreadaisyifyoudo.com> wrote in message news:OpxC1bYhJHA.1292@TK2MSFTNGP02.phx.gbl... > Are you http publishing (not FTP) to a server with the FP server > extensions > installed? > -- > Tom [Pepper] Willett > Microsoft MVP - FrontPage > --------------------------- > "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message > news:%23d$m3RYhJHA.5000@TK2MSFTNGP04.phx.gbl... > : Front Page 2003 SP3 > : IIS6 Windows 2003 R2 Standard DC Server SP2 > : Windows XP Pro SP3 > : > : Just designed a simple default page > : > : Two buttons with a hyper link and > : Hit Counter > : > : This was designed on my Windows XP Pro pc with my FP 2003, Then I > published > : the site on my IIS6 Server > : > : When I bring up the web site the hit counter has a RED X > : > : What can I be missing ? > : > : I have IIS5 on my pc and it fails there also > : > : What am I doing wrong? > : > : Thanks > : > : Tom > : > : > > > To make any component that uses the FrontPage extensions work you either
have to publish using http to a server running the extensions (NOT the folder option) or create the component on the server - opened in FrontPage using a http:// location. Components created on a disc-based web will not work. Components published using FTP or to a disc based (folder option) location will not work, even if the web server is running the extensions. HTTP publishing changes the code in the page to point to the correct executables on the server. -- Show quoteHide quoteRon Symonds - Microsoft MVP (Expression) Reply only to group - emails will be deleted unread. http://www.rxs-enterprises.org/fp "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message news:#FrJXwYhJHA.5244@TK2MSFTNGP06.phx.gbl... > Tom > > I used the folder option to publish and the FP server extensions are > installed on the IIS6 server. > > Is there any way to check to make sure the FP extensions are installed. I > just went into control panal add/remove Microsoft then details on IIS and > FP extensions are checked. > > I even did a IIS reset on the IIS6 server > > I looked in the folder _vti_cnf and the file default.htm.cnt file exists > > somewhere I read something about this folder needs ISUR_SERVER1 user with > write permissions is that correct? > > I tried to give ISUR_SERVER1 user write permissions but the write > persmission box is greyed out under the Deny column > I checked the write box but not sure if the deny is taking over. > > ANy other ideas? > > thanks > > Tom > "Tom [Pepper] Willett" <t**@youreadaisyifyoudo.com> wrote in message > news:OpxC1bYhJHA.1292@TK2MSFTNGP02.phx.gbl... >> Are you http publishing (not FTP) to a server with the FP server >> extensions >> installed? >> -- >> Tom [Pepper] Willett >> Microsoft MVP - FrontPage >> --------------------------- >> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >> news:%23d$m3RYhJHA.5000@TK2MSFTNGP04.phx.gbl... >> : Front Page 2003 SP3 >> : IIS6 Windows 2003 R2 Standard DC Server SP2 >> : Windows XP Pro SP3 >> : >> : Just designed a simple default page >> : >> : Two buttons with a hyper link and >> : Hit Counter >> : >> : This was designed on my Windows XP Pro pc with my FP 2003, Then I >> published >> : the site on my IIS6 Server >> : >> : When I bring up the web site the hit counter has a RED X >> : >> : What can I be missing ? >> : >> : I have IIS5 on my pc and it fails there also >> : >> : What am I doing wrong? >> : >> : Thanks >> : >> : Tom >> : >> : >> >> >> > > Ronx
Thanks for the info But I posted this one earlier today FRONTPAGE Publishing Newbie on this NG about that I tried publishing in FP using http and it displays message unable to open web site I can get to the web site via http://www.test.com This site is on my Windows 2003 R2 Standard DC server sp2 with IIS6 I have FP 2003 on my Windows XP PRO SP3 pc Any ideas or thoughts Thanks Tom Show quoteHide quote "Ronx" <ronx***@hotmail.com> wrote in message news:eIb9SjdhJHA.5724@TK2MSFTNGP02.phx.gbl... > To make any component that uses the FrontPage extensions work you either > have to publish using http to a server running the extensions (NOT the > folder option) or create the component on the server - opened in FrontPage > using a http:// location. > > Components created on a disc-based web will not work. Components > published using FTP or to a disc based (folder option) location will not > work, even if the web server is running the extensions. HTTP publishing > changes the code in the page to point to the correct executables on the > server. > -- > Ron Symonds - Microsoft MVP (Expression) > Reply only to group - emails will be deleted unread. > http://www.rxs-enterprises.org/fp > > "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message > news:#FrJXwYhJHA.5244@TK2MSFTNGP06.phx.gbl... >> Tom >> >> I used the folder option to publish and the FP server extensions are >> installed on the IIS6 server. >> >> Is there any way to check to make sure the FP extensions are installed. I >> just went into control panal add/remove Microsoft then details on IIS and >> FP extensions are checked. >> >> I even did a IIS reset on the IIS6 server >> >> I looked in the folder _vti_cnf and the file default.htm.cnt file exists >> >> somewhere I read something about this folder needs ISUR_SERVER1 user with >> write permissions is that correct? >> >> I tried to give ISUR_SERVER1 user write permissions but the write >> persmission box is greyed out under the Deny column >> I checked the write box but not sure if the deny is taking over. >> >> ANy other ideas? >> >> thanks >> >> Tom >> "Tom [Pepper] Willett" <t**@youreadaisyifyoudo.com> wrote in message >> news:OpxC1bYhJHA.1292@TK2MSFTNGP02.phx.gbl... >>> Are you http publishing (not FTP) to a server with the FP server >>> extensions >>> installed? >>> -- >>> Tom [Pepper] Willett >>> Microsoft MVP - FrontPage >>> --------------------------- >>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>> news:%23d$m3RYhJHA.5000@TK2MSFTNGP04.phx.gbl... >>> : Front Page 2003 SP3 >>> : IIS6 Windows 2003 R2 Standard DC Server SP2 >>> : Windows XP Pro SP3 >>> : >>> : Just designed a simple default page >>> : >>> : Two buttons with a hyper link and >>> : Hit Counter >>> : >>> : This was designed on my Windows XP Pro pc with my FP 2003, Then I >>> published >>> : the site on my IIS6 Server >>> : >>> : When I bring up the web site the hit counter has a RED X >>> : >>> : What can I be missing ? >>> : >>> : I have IIS5 on my pc and it fails there also >>> : >>> : What am I doing wrong? >>> : >>> : Thanks >>> : >>> : Tom >>> : >>> : >>> >>> >>> >> >> > > I tried windows 2003 R2, and replaced it with Windows 2003 SP1. I could
not make a web server work with R2. Try asking in a server newsgroup, such as news://msnews.microsoft.com/microsoft.public.inetserver.iis -- Show quoteHide quoteRon Symonds - Microsoft MVP (Expression) Reply only to group - emails will be deleted unread. http://www.rxs-enterprises.org/fp "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message news:uoIRJ4ehJHA.1780@TK2MSFTNGP03.phx.gbl... > Ronx > > Thanks for the info > But I posted this one earlier today FRONTPAGE Publishing Newbie on this > NG about that > > I tried publishing in FP using http and it displays message unable to > open web site > > > I can get to the web site via http://www.test.com > > This site is on my Windows 2003 R2 Standard DC server sp2 with IIS6 > > I have FP 2003 on my Windows XP PRO SP3 pc > > Any ideas or thoughts > > Thanks > > Tom > "Ronx" <ronx***@hotmail.com> wrote in message > news:eIb9SjdhJHA.5724@TK2MSFTNGP02.phx.gbl... >> To make any component that uses the FrontPage extensions work you either >> have to publish using http to a server running the extensions (NOT the >> folder option) or create the component on the server - opened in >> FrontPage using a http:// location. >> >> Components created on a disc-based web will not work. Components >> published using FTP or to a disc based (folder option) location will not >> work, even if the web server is running the extensions. HTTP publishing >> changes the code in the page to point to the correct executables on the >> server. >> -- >> Ron Symonds - Microsoft MVP (Expression) >> Reply only to group - emails will be deleted unread. >> http://www.rxs-enterprises.org/fp >> >> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >> news:#FrJXwYhJHA.5244@TK2MSFTNGP06.phx.gbl... >>> Tom >>> >>> I used the folder option to publish and the FP server extensions are >>> installed on the IIS6 server. >>> >>> Is there any way to check to make sure the FP extensions are installed. >>> I just went into control panal add/remove Microsoft then details on IIS >>> and FP extensions are checked. >>> >>> I even did a IIS reset on the IIS6 server >>> >>> I looked in the folder _vti_cnf and the file default.htm.cnt file >>> exists >>> >>> somewhere I read something about this folder needs ISUR_SERVER1 user >>> with write permissions is that correct? >>> >>> I tried to give ISUR_SERVER1 user write permissions but the write >>> persmission box is greyed out under the Deny column >>> I checked the write box but not sure if the deny is taking over. >>> >>> ANy other ideas? >>> >>> thanks >>> >>> Tom >>> "Tom [Pepper] Willett" <t**@youreadaisyifyoudo.com> wrote in message >>> news:OpxC1bYhJHA.1292@TK2MSFTNGP02.phx.gbl... >>>> Are you http publishing (not FTP) to a server with the FP server >>>> extensions >>>> installed? >>>> -- >>>> Tom [Pepper] Willett >>>> Microsoft MVP - FrontPage >>>> --------------------------- >>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>> news:%23d$m3RYhJHA.5000@TK2MSFTNGP04.phx.gbl... >>>> : Front Page 2003 SP3 >>>> : IIS6 Windows 2003 R2 Standard DC Server SP2 >>>> : Windows XP Pro SP3 >>>> : >>>> : Just designed a simple default page >>>> : >>>> : Two buttons with a hyper link and >>>> : Hit Counter >>>> : >>>> : This was designed on my Windows XP Pro pc with my FP 2003, Then I >>>> published >>>> : the site on my IIS6 Server >>>> : >>>> : When I bring up the web site the hit counter has a RED X >>>> : >>>> : What can I be missing ? >>>> : >>>> : I have IIS5 on my pc and it fails there also >>>> : >>>> : What am I doing wrong? >>>> : >>>> : Thanks >>>> : >>>> : Tom >>>> : >>>> : >>>> >>>> >>>> >>> >>> >> >> > > Ronx
Thanks for your help I found this KB828909 online and when I searched for the _vti_inf.html file it was not found hence Frontpage Server extensions not installed. But when I went into control panel and windows components applications IIS details frontpage server extensions are checked off. I then uninstalled FPSE and reinstalled FPSE but no luck Wonder whats up with Windows 2003 Server I even turned off my Kaspersky anti virus and that did not help either I did post something on the IIS ng If you think of any thing let me know Thanks Tom Show quoteHide quote "Ronx" <ronx***@hotmail.com> wrote in message news:eH7A3JghJHA.5540@TK2MSFTNGP06.phx.gbl... >I tried windows 2003 R2, and replaced it with Windows 2003 SP1. I could >not make a web server work with R2. > Try asking in a server newsgroup, such as > news://msnews.microsoft.com/microsoft.public.inetserver.iis > -- > Ron Symonds - Microsoft MVP (Expression) > Reply only to group - emails will be deleted unread. > http://www.rxs-enterprises.org/fp > > "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message > news:uoIRJ4ehJHA.1780@TK2MSFTNGP03.phx.gbl... >> Ronx >> >> Thanks for the info >> But I posted this one earlier today FRONTPAGE Publishing Newbie on this >> NG about that >> >> I tried publishing in FP using http and it displays message unable to >> open web site >> >> >> I can get to the web site via http://www.test.com >> >> This site is on my Windows 2003 R2 Standard DC server sp2 with IIS6 >> >> I have FP 2003 on my Windows XP PRO SP3 pc >> >> Any ideas or thoughts >> >> Thanks >> >> Tom >> "Ronx" <ronx***@hotmail.com> wrote in message >> news:eIb9SjdhJHA.5724@TK2MSFTNGP02.phx.gbl... >>> To make any component that uses the FrontPage extensions work you either >>> have to publish using http to a server running the extensions (NOT the >>> folder option) or create the component on the server - opened in >>> FrontPage using a http:// location. >>> >>> Components created on a disc-based web will not work. Components >>> published using FTP or to a disc based (folder option) location will not >>> work, even if the web server is running the extensions. HTTP publishing >>> changes the code in the page to point to the correct executables on the >>> server. >>> -- >>> Ron Symonds - Microsoft MVP (Expression) >>> Reply only to group - emails will be deleted unread. >>> http://www.rxs-enterprises.org/fp >>> >>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>> news:#FrJXwYhJHA.5244@TK2MSFTNGP06.phx.gbl... >>>> Tom >>>> >>>> I used the folder option to publish and the FP server extensions are >>>> installed on the IIS6 server. >>>> >>>> Is there any way to check to make sure the FP extensions are installed. >>>> I just went into control panal add/remove Microsoft then details on IIS >>>> and FP extensions are checked. >>>> >>>> I even did a IIS reset on the IIS6 server >>>> >>>> I looked in the folder _vti_cnf and the file default.htm.cnt file >>>> exists >>>> >>>> somewhere I read something about this folder needs ISUR_SERVER1 user >>>> with write permissions is that correct? >>>> >>>> I tried to give ISUR_SERVER1 user write permissions but the write >>>> persmission box is greyed out under the Deny column >>>> I checked the write box but not sure if the deny is taking over. >>>> >>>> ANy other ideas? >>>> >>>> thanks >>>> >>>> Tom >>>> "Tom [Pepper] Willett" <t**@youreadaisyifyoudo.com> wrote in message >>>> news:OpxC1bYhJHA.1292@TK2MSFTNGP02.phx.gbl... >>>>> Are you http publishing (not FTP) to a server with the FP server >>>>> extensions >>>>> installed? >>>>> -- >>>>> Tom [Pepper] Willett >>>>> Microsoft MVP - FrontPage >>>>> --------------------------- >>>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>>> news:%23d$m3RYhJHA.5000@TK2MSFTNGP04.phx.gbl... >>>>> : Front Page 2003 SP3 >>>>> : IIS6 Windows 2003 R2 Standard DC Server SP2 >>>>> : Windows XP Pro SP3 >>>>> : >>>>> : Just designed a simple default page >>>>> : >>>>> : Two buttons with a hyper link and >>>>> : Hit Counter >>>>> : >>>>> : This was designed on my Windows XP Pro pc with my FP 2003, Then I >>>>> published >>>>> : the site on my IIS6 Server >>>>> : >>>>> : When I bring up the web site the hit counter has a RED X >>>>> : >>>>> : What can I be missing ? >>>>> : >>>>> : I have IIS5 on my pc and it fails there also >>>>> : >>>>> : What am I doing wrong? >>>>> : >>>>> : Thanks >>>>> : >>>>> : Tom >>>>> : >>>>> : >>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > > Probably has to do with security features of Win 2003 server, such as URL
scan. There are settings, that by default, must be changed. Keep plugging away in the IIS newsgroups.... -- Show quoteHide quoteTom [Pepper] Willett Microsoft MVP - FrontPage --------------------------- "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message news:unF7QsjhJHA.4028@TK2MSFTNGP03.phx.gbl... : Ronx : : Thanks for your help : I found this KB828909 online and when I searched for the _vti_inf.html file : it was not found hence Frontpage Server extensions not installed. : : But when I went into control panel and windows components applications IIS : details frontpage server extensions are checked off. : : I then uninstalled FPSE and reinstalled FPSE but no luck : : Wonder whats up with Windows 2003 Server : : I even turned off my Kaspersky anti virus and that did not help either : : I did post something on the IIS ng : : If you think of any thing let me know : : Thanks : : Tom : "Ronx" <ronx***@hotmail.com> wrote in message : news:eH7A3JghJHA.5540@TK2MSFTNGP06.phx.gbl... : >I tried windows 2003 R2, and replaced it with Windows 2003 SP1. I could : >not make a web server work with R2. : > Try asking in a server newsgroup, such as : > news://msnews.microsoft.com/microsoft.public.inetserver.iis : > -- : > Ron Symonds - Microsoft MVP (Expression) : > Reply only to group - emails will be deleted unread. : > http://www.rxs-enterprises.org/fp : > : > "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message : > news:uoIRJ4ehJHA.1780@TK2MSFTNGP03.phx.gbl... : >> Ronx : >> : >> Thanks for the info : >> But I posted this one earlier today FRONTPAGE Publishing Newbie on this : >> NG about that : >> : >> I tried publishing in FP using http and it displays message unable to : >> open web site : >> : >> : >> I can get to the web site via http://www.test.com : >> : >> This site is on my Windows 2003 R2 Standard DC server sp2 with IIS6 : >> : >> I have FP 2003 on my Windows XP PRO SP3 pc : >> : >> Any ideas or thoughts : >> : >> Thanks : >> : >> Tom : >> "Ronx" <ronx***@hotmail.com> wrote in message : >> news:eIb9SjdhJHA.5724@TK2MSFTNGP02.phx.gbl... : >>> To make any component that uses the FrontPage extensions work you either : >>> have to publish using http to a server running the extensions (NOT the : >>> folder option) or create the component on the server - opened in : >>> FrontPage using a http:// location. : >>> : >>> Components created on a disc-based web will not work. Components : >>> published using FTP or to a disc based (folder option) location will not : >>> work, even if the web server is running the extensions. HTTP publishing : >>> changes the code in the page to point to the correct executables on the : >>> server. : >>> -- : >>> Ron Symonds - Microsoft MVP (Expression) : >>> Reply only to group - emails will be deleted unread. : >>> http://www.rxs-enterprises.org/fp : >>> : >>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message : >>> news:#FrJXwYhJHA.5244@TK2MSFTNGP06.phx.gbl... : >>>> Tom : >>>> : >>>> I used the folder option to publish and the FP server extensions are : >>>> installed on the IIS6 server. : >>>> : >>>> Is there any way to check to make sure the FP extensions are installed. : >>>> I just went into control panal add/remove Microsoft then details on IIS : >>>> and FP extensions are checked. : >>>> : >>>> I even did a IIS reset on the IIS6 server : >>>> : >>>> I looked in the folder _vti_cnf and the file default.htm.cnt file : >>>> exists : >>>> : >>>> somewhere I read something about this folder needs ISUR_SERVER1 user : >>>> with write permissions is that correct? : >>>> : >>>> I tried to give ISUR_SERVER1 user write permissions but the write : >>>> persmission box is greyed out under the Deny column : >>>> I checked the write box but not sure if the deny is taking over. : >>>> : >>>> ANy other ideas? : >>>> : >>>> thanks : >>>> : >>>> Tom : >>>> "Tom [Pepper] Willett" <t**@youreadaisyifyoudo.com> wrote in message : >>>> news:OpxC1bYhJHA.1292@TK2MSFTNGP02.phx.gbl... : >>>>> Are you http publishing (not FTP) to a server with the FP server : >>>>> extensions : >>>>> installed? : >>>>> -- : >>>>> Tom [Pepper] Willett : >>>>> Microsoft MVP - FrontPage : >>>>> --------------------------- : >>>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message : >>>>> news:%23d$m3RYhJHA.5000@TK2MSFTNGP04.phx.gbl... : >>>>> : Front Page 2003 SP3 : >>>>> : IIS6 Windows 2003 R2 Standard DC Server SP2 : >>>>> : Windows XP Pro SP3 : >>>>> : : >>>>> : Just designed a simple default page : >>>>> : : >>>>> : Two buttons with a hyper link and : >>>>> : Hit Counter : >>>>> : : >>>>> : This was designed on my Windows XP Pro pc with my FP 2003, Then I : >>>>> published : >>>>> : the site on my IIS6 Server : >>>>> : : >>>>> : When I bring up the web site the hit counter has a RED X : >>>>> : : >>>>> : What can I be missing ? : >>>>> : : >>>>> : I have IIS5 on my pc and it fails there also : >>>>> : : >>>>> : What am I doing wrong? : >>>>> : : >>>>> : Thanks : >>>>> : : >>>>> : Tom : >>>>> : : >>>>> : : >>>>> : >>>>> : >>>>> : >>>> : >>>> : >>> : >>> : >> : >> : > : > : : Tom
Yes I think you might be right but the IIS NG never responds like you guys do. I posted something on that NG 3 weeks ago and no one answered. I just posted this issue on IIS ng today lets see what happens. Thanks Tom Show quoteHide quote "Tom [Pepper] Willett" <t**@youreadaisyifyoudo.com> wrote in message news:uiqIyzjhJHA.1388@TK2MSFTNGP06.phx.gbl... > Probably has to do with security features of Win 2003 server, such as URL > scan. There are settings, that by default, must be changed. Keep > plugging > away in the IIS newsgroups.... > -- > Tom [Pepper] Willett > Microsoft MVP - FrontPage > --------------------------- > "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message > news:unF7QsjhJHA.4028@TK2MSFTNGP03.phx.gbl... > : Ronx > : > : Thanks for your help > : I found this KB828909 online and when I searched for the _vti_inf.html > file > : it was not found hence Frontpage Server extensions not installed. > : > : But when I went into control panel and windows components applications > IIS > : details frontpage server extensions are checked off. > : > : I then uninstalled FPSE and reinstalled FPSE but no luck > : > : Wonder whats up with Windows 2003 Server > : > : I even turned off my Kaspersky anti virus and that did not help either > : > : I did post something on the IIS ng > : > : If you think of any thing let me know > : > : Thanks > : > : Tom > : "Ronx" <ronx***@hotmail.com> wrote in message > : news:eH7A3JghJHA.5540@TK2MSFTNGP06.phx.gbl... > : >I tried windows 2003 R2, and replaced it with Windows 2003 SP1. I > could > : >not make a web server work with R2. > : > Try asking in a server newsgroup, such as > : > news://msnews.microsoft.com/microsoft.public.inetserver.iis > : > -- > : > Ron Symonds - Microsoft MVP (Expression) > : > Reply only to group - emails will be deleted unread. > : > http://www.rxs-enterprises.org/fp > : > > : > "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message > : > news:uoIRJ4ehJHA.1780@TK2MSFTNGP03.phx.gbl... > : >> Ronx > : >> > : >> Thanks for the info > : >> But I posted this one earlier today FRONTPAGE Publishing Newbie on > this > : >> NG about that > : >> > : >> I tried publishing in FP using http and it displays message unable to > : >> open web site > : >> > : >> > : >> I can get to the web site via http://www.test.com > : >> > : >> This site is on my Windows 2003 R2 Standard DC server sp2 with IIS6 > : >> > : >> I have FP 2003 on my Windows XP PRO SP3 pc > : >> > : >> Any ideas or thoughts > : >> > : >> Thanks > : >> > : >> Tom > : >> "Ronx" <ronx***@hotmail.com> wrote in message > : >> news:eIb9SjdhJHA.5724@TK2MSFTNGP02.phx.gbl... > : >>> To make any component that uses the FrontPage extensions work you > either > : >>> have to publish using http to a server running the extensions (NOT > the > : >>> folder option) or create the component on the server - opened in > : >>> FrontPage using a http:// location. > : >>> > : >>> Components created on a disc-based web will not work. Components > : >>> published using FTP or to a disc based (folder option) location will > not > : >>> work, even if the web server is running the extensions. HTTP > publishing > : >>> changes the code in the page to point to the correct executables on > the > : >>> server. > : >>> -- > : >>> Ron Symonds - Microsoft MVP (Expression) > : >>> Reply only to group - emails will be deleted unread. > : >>> http://www.rxs-enterprises.org/fp > : >>> > : >>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message > : >>> news:#FrJXwYhJHA.5244@TK2MSFTNGP06.phx.gbl... > : >>>> Tom > : >>>> > : >>>> I used the folder option to publish and the FP server extensions > are > : >>>> installed on the IIS6 server. > : >>>> > : >>>> Is there any way to check to make sure the FP extensions are > installed. > : >>>> I just went into control panal add/remove Microsoft then details on > IIS > : >>>> and FP extensions are checked. > : >>>> > : >>>> I even did a IIS reset on the IIS6 server > : >>>> > : >>>> I looked in the folder _vti_cnf and the file default.htm.cnt file > : >>>> exists > : >>>> > : >>>> somewhere I read something about this folder needs ISUR_SERVER1 > user > : >>>> with write permissions is that correct? > : >>>> > : >>>> I tried to give ISUR_SERVER1 user write permissions but the write > : >>>> persmission box is greyed out under the Deny column > : >>>> I checked the write box but not sure if the deny is taking over. > : >>>> > : >>>> ANy other ideas? > : >>>> > : >>>> thanks > : >>>> > : >>>> Tom > : >>>> "Tom [Pepper] Willett" <t**@youreadaisyifyoudo.com> wrote in > message > : >>>> news:OpxC1bYhJHA.1292@TK2MSFTNGP02.phx.gbl... > : >>>>> Are you http publishing (not FTP) to a server with the FP server > : >>>>> extensions > : >>>>> installed? > : >>>>> -- > : >>>>> Tom [Pepper] Willett > : >>>>> Microsoft MVP - FrontPage > : >>>>> --------------------------- > : >>>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message > : >>>>> news:%23d$m3RYhJHA.5000@TK2MSFTNGP04.phx.gbl... > : >>>>> : Front Page 2003 SP3 > : >>>>> : IIS6 Windows 2003 R2 Standard DC Server SP2 > : >>>>> : Windows XP Pro SP3 > : >>>>> : > : >>>>> : Just designed a simple default page > : >>>>> : > : >>>>> : Two buttons with a hyper link and > : >>>>> : Hit Counter > : >>>>> : > : >>>>> : This was designed on my Windows XP Pro pc with my FP 2003, Then > I > : >>>>> published > : >>>>> : the site on my IIS6 Server > : >>>>> : > : >>>>> : When I bring up the web site the hit counter has a RED X > : >>>>> : > : >>>>> : What can I be missing ? > : >>>>> : > : >>>>> : I have IIS5 on my pc and it fails there also > : >>>>> : > : >>>>> : What am I doing wrong? > : >>>>> : > : >>>>> : Thanks > : >>>>> : > : >>>>> : Tom > : >>>>> : > : >>>>> : > : >>>>> > : >>>>> > : >>>>> > : >>>> > : >>>> > : >>> > : >>> > : >> > : >> > : > > : > > : > : > > > Have you extended the website? Administration Tasks->Microsoft SharePoint
Administrator And have you Allowed FrontPage extensions in the IIS Manager web service extensions section? -- Show quoteHide quoteRon Symonds - Microsoft MVP (Expression) Reply only to group - emails will be deleted unread. http://www.rxs-enterprises.org/fp "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message news:unF7QsjhJHA.4028@TK2MSFTNGP03.phx.gbl... > Ronx > > Thanks for your help > I found this KB828909 online and when I searched for the _vti_inf.html > file it was not found hence Frontpage Server extensions not installed. > > But when I went into control panel and windows components applications > IIS details frontpage server extensions are checked off. > > I then uninstalled FPSE and reinstalled FPSE but no luck > > Wonder whats up with Windows 2003 Server > > I even turned off my Kaspersky anti virus and that did not help either > > I did post something on the IIS ng > > If you think of any thing let me know > > Thanks > > Tom > "Ronx" <ronx***@hotmail.com> wrote in message > news:eH7A3JghJHA.5540@TK2MSFTNGP06.phx.gbl... >>I tried windows 2003 R2, and replaced it with Windows 2003 SP1. I could >>not make a web server work with R2. >> Try asking in a server newsgroup, such as >> news://msnews.microsoft.com/microsoft.public.inetserver.iis >> -- >> Ron Symonds - Microsoft MVP (Expression) >> Reply only to group - emails will be deleted unread. >> http://www.rxs-enterprises.org/fp >> >> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >> news:uoIRJ4ehJHA.1780@TK2MSFTNGP03.phx.gbl... >>> Ronx >>> >>> Thanks for the info >>> But I posted this one earlier today FRONTPAGE Publishing Newbie on this >>> NG about that >>> >>> I tried publishing in FP using http and it displays message unable to >>> open web site >>> >>> >>> I can get to the web site via http://www.test.com >>> >>> This site is on my Windows 2003 R2 Standard DC server sp2 with IIS6 >>> >>> I have FP 2003 on my Windows XP PRO SP3 pc >>> >>> Any ideas or thoughts >>> >>> Thanks >>> >>> Tom >>> "Ronx" <ronx***@hotmail.com> wrote in message >>> news:eIb9SjdhJHA.5724@TK2MSFTNGP02.phx.gbl... >>>> To make any component that uses the FrontPage extensions work you >>>> either have to publish using http to a server running the extensions >>>> (NOT the folder option) or create the component on the server - opened >>>> in FrontPage using a http:// location. >>>> >>>> Components created on a disc-based web will not work. Components >>>> published using FTP or to a disc based (folder option) location will >>>> not work, even if the web server is running the extensions. HTTP >>>> publishing changes the code in the page to point to the correct >>>> executables on the server. >>>> -- >>>> Ron Symonds - Microsoft MVP (Expression) >>>> Reply only to group - emails will be deleted unread. >>>> http://www.rxs-enterprises.org/fp >>>> >>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>> news:#FrJXwYhJHA.5244@TK2MSFTNGP06.phx.gbl... >>>>> Tom >>>>> >>>>> I used the folder option to publish and the FP server extensions are >>>>> installed on the IIS6 server. >>>>> >>>>> Is there any way to check to make sure the FP extensions are >>>>> installed. I just went into control panal add/remove Microsoft then >>>>> details on IIS and FP extensions are checked. >>>>> >>>>> I even did a IIS reset on the IIS6 server >>>>> >>>>> I looked in the folder _vti_cnf and the file default.htm.cnt file >>>>> exists >>>>> >>>>> somewhere I read something about this folder needs ISUR_SERVER1 user >>>>> with write permissions is that correct? >>>>> >>>>> I tried to give ISUR_SERVER1 user write permissions but the write >>>>> persmission box is greyed out under the Deny column >>>>> I checked the write box but not sure if the deny is taking over. >>>>> >>>>> ANy other ideas? >>>>> >>>>> thanks >>>>> >>>>> Tom >>>>> "Tom [Pepper] Willett" <t**@youreadaisyifyoudo.com> wrote in message >>>>> news:OpxC1bYhJHA.1292@TK2MSFTNGP02.phx.gbl... >>>>>> Are you http publishing (not FTP) to a server with the FP server >>>>>> extensions >>>>>> installed? >>>>>> -- >>>>>> Tom [Pepper] Willett >>>>>> Microsoft MVP - FrontPage >>>>>> --------------------------- >>>>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>>>> news:%23d$m3RYhJHA.5000@TK2MSFTNGP04.phx.gbl... >>>>>> : Front Page 2003 SP3 >>>>>> : IIS6 Windows 2003 R2 Standard DC Server SP2 >>>>>> : Windows XP Pro SP3 >>>>>> : >>>>>> : Just designed a simple default page >>>>>> : >>>>>> : Two buttons with a hyper link and >>>>>> : Hit Counter >>>>>> : >>>>>> : This was designed on my Windows XP Pro pc with my FP 2003, Then I >>>>>> published >>>>>> : the site on my IIS6 Server >>>>>> : >>>>>> : When I bring up the web site the hit counter has a RED X >>>>>> : >>>>>> : What can I be missing ? >>>>>> : >>>>>> : I have IIS5 on my pc and it fails there also >>>>>> : >>>>>> : What am I doing wrong? >>>>>> : >>>>>> : Thanks >>>>>> : >>>>>> : Tom >>>>>> : >>>>>> : >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > > Ron
I created this web site in IIS6 i did not use WSS Central Adminstration Should I delete the site from IIS6 then create it via WSS CA? This web site is not for Sharepoint it is being developed for external user access to my home web site. Do we need to create all web sites now via WSS CA? I try this out while I wait to hear from you. Thanks tom Show quoteHide quote "Ronx" <ronx***@hotmail.com> wrote in message news:enn5SNqhJHA.5244@TK2MSFTNGP06.phx.gbl... > Have you extended the website? Administration Tasks->Microsoft SharePoint > Administrator > And have you Allowed FrontPage extensions in the IIS Manager web service > extensions section? > -- > Ron Symonds - Microsoft MVP (Expression) > Reply only to group - emails will be deleted unread. > http://www.rxs-enterprises.org/fp > > "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message > news:unF7QsjhJHA.4028@TK2MSFTNGP03.phx.gbl... >> Ronx >> >> Thanks for your help >> I found this KB828909 online and when I searched for the _vti_inf.html >> file it was not found hence Frontpage Server extensions not installed. >> >> But when I went into control panel and windows components applications >> IIS details frontpage server extensions are checked off. >> >> I then uninstalled FPSE and reinstalled FPSE but no luck >> >> Wonder whats up with Windows 2003 Server >> >> I even turned off my Kaspersky anti virus and that did not help either >> >> I did post something on the IIS ng >> >> If you think of any thing let me know >> >> Thanks >> >> Tom >> "Ronx" <ronx***@hotmail.com> wrote in message >> news:eH7A3JghJHA.5540@TK2MSFTNGP06.phx.gbl... >>>I tried windows 2003 R2, and replaced it with Windows 2003 SP1. I could >>>not make a web server work with R2. >>> Try asking in a server newsgroup, such as >>> news://msnews.microsoft.com/microsoft.public.inetserver.iis >>> -- >>> Ron Symonds - Microsoft MVP (Expression) >>> Reply only to group - emails will be deleted unread. >>> http://www.rxs-enterprises.org/fp >>> >>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>> news:uoIRJ4ehJHA.1780@TK2MSFTNGP03.phx.gbl... >>>> Ronx >>>> >>>> Thanks for the info >>>> But I posted this one earlier today FRONTPAGE Publishing Newbie on this >>>> NG about that >>>> >>>> I tried publishing in FP using http and it displays message unable to >>>> open web site >>>> >>>> >>>> I can get to the web site via http://www.test.com >>>> >>>> This site is on my Windows 2003 R2 Standard DC server sp2 with IIS6 >>>> >>>> I have FP 2003 on my Windows XP PRO SP3 pc >>>> >>>> Any ideas or thoughts >>>> >>>> Thanks >>>> >>>> Tom >>>> "Ronx" <ronx***@hotmail.com> wrote in message >>>> news:eIb9SjdhJHA.5724@TK2MSFTNGP02.phx.gbl... >>>>> To make any component that uses the FrontPage extensions work you >>>>> either have to publish using http to a server running the extensions >>>>> (NOT the folder option) or create the component on the server - opened >>>>> in FrontPage using a http:// location. >>>>> >>>>> Components created on a disc-based web will not work. Components >>>>> published using FTP or to a disc based (folder option) location will >>>>> not work, even if the web server is running the extensions. HTTP >>>>> publishing changes the code in the page to point to the correct >>>>> executables on the server. >>>>> -- >>>>> Ron Symonds - Microsoft MVP (Expression) >>>>> Reply only to group - emails will be deleted unread. >>>>> http://www.rxs-enterprises.org/fp >>>>> >>>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>>> news:#FrJXwYhJHA.5244@TK2MSFTNGP06.phx.gbl... >>>>>> Tom >>>>>> >>>>>> I used the folder option to publish and the FP server extensions are >>>>>> installed on the IIS6 server. >>>>>> >>>>>> Is there any way to check to make sure the FP extensions are >>>>>> installed. I just went into control panal add/remove Microsoft then >>>>>> details on IIS and FP extensions are checked. >>>>>> >>>>>> I even did a IIS reset on the IIS6 server >>>>>> >>>>>> I looked in the folder _vti_cnf and the file default.htm.cnt file >>>>>> exists >>>>>> >>>>>> somewhere I read something about this folder needs ISUR_SERVER1 user >>>>>> with write permissions is that correct? >>>>>> >>>>>> I tried to give ISUR_SERVER1 user write permissions but the write >>>>>> persmission box is greyed out under the Deny column >>>>>> I checked the write box but not sure if the deny is taking over. >>>>>> >>>>>> ANy other ideas? >>>>>> >>>>>> thanks >>>>>> >>>>>> Tom >>>>>> "Tom [Pepper] Willett" <t**@youreadaisyifyoudo.com> wrote in message >>>>>> news:OpxC1bYhJHA.1292@TK2MSFTNGP02.phx.gbl... >>>>>>> Are you http publishing (not FTP) to a server with the FP server >>>>>>> extensions >>>>>>> installed? >>>>>>> -- >>>>>>> Tom [Pepper] Willett >>>>>>> Microsoft MVP - FrontPage >>>>>>> --------------------------- >>>>>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>>>>> news:%23d$m3RYhJHA.5000@TK2MSFTNGP04.phx.gbl... >>>>>>> : Front Page 2003 SP3 >>>>>>> : IIS6 Windows 2003 R2 Standard DC Server SP2 >>>>>>> : Windows XP Pro SP3 >>>>>>> : >>>>>>> : Just designed a simple default page >>>>>>> : >>>>>>> : Two buttons with a hyper link and >>>>>>> : Hit Counter >>>>>>> : >>>>>>> : This was designed on my Windows XP Pro pc with my FP 2003, Then I >>>>>>> published >>>>>>> : the site on my IIS6 Server >>>>>>> : >>>>>>> : When I bring up the web site the hit counter has a RED X >>>>>>> : >>>>>>> : What can I be missing ? >>>>>>> : >>>>>>> : I have IIS5 on my pc and it fails there also >>>>>>> : >>>>>>> : What am I doing wrong? >>>>>>> : >>>>>>> : Thanks >>>>>>> : >>>>>>> : Tom >>>>>>> : >>>>>>> : >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > > Ron
Just tried creating the site in WSS CA Still does not work I see the FPSE files now under the site I can not connect to the site Why do we need to do this using Sharepoint? Sharepoint is not an IIS web site manager program IIS6 needs to have the ability to add FPSE to any web site no matter how it is created. If I do a New Web site in IIS6 why can I not get FPSE to work What do I do now Tom Show quoteHide quote "Ronx" <ronx***@hotmail.com> wrote in message news:enn5SNqhJHA.5244@TK2MSFTNGP06.phx.gbl... > Have you extended the website? Administration Tasks->Microsoft SharePoint > Administrator > And have you Allowed FrontPage extensions in the IIS Manager web service > extensions section? > -- > Ron Symonds - Microsoft MVP (Expression) > Reply only to group - emails will be deleted unread. > http://www.rxs-enterprises.org/fp > > "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message > news:unF7QsjhJHA.4028@TK2MSFTNGP03.phx.gbl... >> Ronx >> >> Thanks for your help >> I found this KB828909 online and when I searched for the _vti_inf.html >> file it was not found hence Frontpage Server extensions not installed. >> >> But when I went into control panel and windows components applications >> IIS details frontpage server extensions are checked off. >> >> I then uninstalled FPSE and reinstalled FPSE but no luck >> >> Wonder whats up with Windows 2003 Server >> >> I even turned off my Kaspersky anti virus and that did not help either >> >> I did post something on the IIS ng >> >> If you think of any thing let me know >> >> Thanks >> >> Tom >> "Ronx" <ronx***@hotmail.com> wrote in message >> news:eH7A3JghJHA.5540@TK2MSFTNGP06.phx.gbl... >>>I tried windows 2003 R2, and replaced it with Windows 2003 SP1. I could >>>not make a web server work with R2. >>> Try asking in a server newsgroup, such as >>> news://msnews.microsoft.com/microsoft.public.inetserver.iis >>> -- >>> Ron Symonds - Microsoft MVP (Expression) >>> Reply only to group - emails will be deleted unread. >>> http://www.rxs-enterprises.org/fp >>> >>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>> news:uoIRJ4ehJHA.1780@TK2MSFTNGP03.phx.gbl... >>>> Ronx >>>> >>>> Thanks for the info >>>> But I posted this one earlier today FRONTPAGE Publishing Newbie on this >>>> NG about that >>>> >>>> I tried publishing in FP using http and it displays message unable to >>>> open web site >>>> >>>> >>>> I can get to the web site via http://www.test.com >>>> >>>> This site is on my Windows 2003 R2 Standard DC server sp2 with IIS6 >>>> >>>> I have FP 2003 on my Windows XP PRO SP3 pc >>>> >>>> Any ideas or thoughts >>>> >>>> Thanks >>>> >>>> Tom >>>> "Ronx" <ronx***@hotmail.com> wrote in message >>>> news:eIb9SjdhJHA.5724@TK2MSFTNGP02.phx.gbl... >>>>> To make any component that uses the FrontPage extensions work you >>>>> either have to publish using http to a server running the extensions >>>>> (NOT the folder option) or create the component on the server - opened >>>>> in FrontPage using a http:// location. >>>>> >>>>> Components created on a disc-based web will not work. Components >>>>> published using FTP or to a disc based (folder option) location will >>>>> not work, even if the web server is running the extensions. HTTP >>>>> publishing changes the code in the page to point to the correct >>>>> executables on the server. >>>>> -- >>>>> Ron Symonds - Microsoft MVP (Expression) >>>>> Reply only to group - emails will be deleted unread. >>>>> http://www.rxs-enterprises.org/fp >>>>> >>>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>>> news:#FrJXwYhJHA.5244@TK2MSFTNGP06.phx.gbl... >>>>>> Tom >>>>>> >>>>>> I used the folder option to publish and the FP server extensions are >>>>>> installed on the IIS6 server. >>>>>> >>>>>> Is there any way to check to make sure the FP extensions are >>>>>> installed. I just went into control panal add/remove Microsoft then >>>>>> details on IIS and FP extensions are checked. >>>>>> >>>>>> I even did a IIS reset on the IIS6 server >>>>>> >>>>>> I looked in the folder _vti_cnf and the file default.htm.cnt file >>>>>> exists >>>>>> >>>>>> somewhere I read something about this folder needs ISUR_SERVER1 user >>>>>> with write permissions is that correct? >>>>>> >>>>>> I tried to give ISUR_SERVER1 user write permissions but the write >>>>>> persmission box is greyed out under the Deny column >>>>>> I checked the write box but not sure if the deny is taking over. >>>>>> >>>>>> ANy other ideas? >>>>>> >>>>>> thanks >>>>>> >>>>>> Tom >>>>>> "Tom [Pepper] Willett" <t**@youreadaisyifyoudo.com> wrote in message >>>>>> news:OpxC1bYhJHA.1292@TK2MSFTNGP02.phx.gbl... >>>>>>> Are you http publishing (not FTP) to a server with the FP server >>>>>>> extensions >>>>>>> installed? >>>>>>> -- >>>>>>> Tom [Pepper] Willett >>>>>>> Microsoft MVP - FrontPage >>>>>>> --------------------------- >>>>>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>>>>> news:%23d$m3RYhJHA.5000@TK2MSFTNGP04.phx.gbl... >>>>>>> : Front Page 2003 SP3 >>>>>>> : IIS6 Windows 2003 R2 Standard DC Server SP2 >>>>>>> : Windows XP Pro SP3 >>>>>>> : >>>>>>> : Just designed a simple default page >>>>>>> : >>>>>>> : Two buttons with a hyper link and >>>>>>> : Hit Counter >>>>>>> : >>>>>>> : This was designed on my Windows XP Pro pc with my FP 2003, Then I >>>>>>> published >>>>>>> : the site on my IIS6 Server >>>>>>> : >>>>>>> : When I bring up the web site the hit counter has a RED X >>>>>>> : >>>>>>> : What can I be missing ? >>>>>>> : >>>>>>> : I have IIS5 on my pc and it fails there also >>>>>>> : >>>>>>> : What am I doing wrong? >>>>>>> : >>>>>>> : Thanks >>>>>>> : >>>>>>> : Tom >>>>>>> : >>>>>>> : >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > > The Sharepoint Administrator is for administrating the FP 2002 extensions -
not Sharepoint. Create the site in IIS and use the Sharepoint Admin to extend the site with FP extensions. The extensions will be installed on Port 80 - All your URLs must use port 80 - not 81 or any other number. -- Show quoteHide quoteRon Symonds - Microsoft MVP (Expression) Reply only to group - emails will be deleted unread. http://www.rxs-enterprises.org/fp "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message news:OMpz21vhJHA.3444@TK2MSFTNGP03.phx.gbl... > Ron > > Just tried creating the site in WSS CA > > Still does not work I see the FPSE files now under the site > > I can not connect to the site > > Why do we need to do this using Sharepoint? Sharepoint is not an IIS web > site manager program > > IIS6 needs to have the ability to add FPSE to any web site no matter how > it is created. > > If I do a New Web site in IIS6 why can I not get FPSE to work > > What do I do now > > Tom > "Ronx" <ronx***@hotmail.com> wrote in message > news:enn5SNqhJHA.5244@TK2MSFTNGP06.phx.gbl... >> Have you extended the website? Administration Tasks->Microsoft >> SharePoint Administrator >> And have you Allowed FrontPage extensions in the IIS Manager web service >> extensions section? >> -- >> Ron Symonds - Microsoft MVP (Expression) >> Reply only to group - emails will be deleted unread. >> http://www.rxs-enterprises.org/fp >> >> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >> news:unF7QsjhJHA.4028@TK2MSFTNGP03.phx.gbl... >>> Ronx >>> >>> Thanks for your help >>> I found this KB828909 online and when I searched for the _vti_inf.html >>> file it was not found hence Frontpage Server extensions not installed. >>> >>> But when I went into control panel and windows components applications >>> IIS details frontpage server extensions are checked off. >>> >>> I then uninstalled FPSE and reinstalled FPSE but no luck >>> >>> Wonder whats up with Windows 2003 Server >>> >>> I even turned off my Kaspersky anti virus and that did not help either >>> >>> I did post something on the IIS ng >>> >>> If you think of any thing let me know >>> >>> Thanks >>> >>> Tom >>> "Ronx" <ronx***@hotmail.com> wrote in message >>> news:eH7A3JghJHA.5540@TK2MSFTNGP06.phx.gbl... >>>>I tried windows 2003 R2, and replaced it with Windows 2003 SP1. I >>>>could not make a web server work with R2. >>>> Try asking in a server newsgroup, such as >>>> news://msnews.microsoft.com/microsoft.public.inetserver.iis >>>> -- >>>> Ron Symonds - Microsoft MVP (Expression) >>>> Reply only to group - emails will be deleted unread. >>>> http://www.rxs-enterprises.org/fp >>>> >>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>> news:uoIRJ4ehJHA.1780@TK2MSFTNGP03.phx.gbl... >>>>> Ronx >>>>> >>>>> Thanks for the info >>>>> But I posted this one earlier today FRONTPAGE Publishing Newbie on >>>>> this NG about that >>>>> >>>>> I tried publishing in FP using http and it displays message unable to >>>>> open web site >>>>> >>>>> >>>>> I can get to the web site via http://www.test.com >>>>> >>>>> This site is on my Windows 2003 R2 Standard DC server sp2 with IIS6 >>>>> >>>>> I have FP 2003 on my Windows XP PRO SP3 pc >>>>> >>>>> Any ideas or thoughts >>>>> >>>>> Thanks >>>>> >>>>> Tom >>>>> "Ronx" <ronx***@hotmail.com> wrote in message >>>>> news:eIb9SjdhJHA.5724@TK2MSFTNGP02.phx.gbl... >>>>>> To make any component that uses the FrontPage extensions work you >>>>>> either have to publish using http to a server running the extensions >>>>>> (NOT the folder option) or create the component on the server - >>>>>> opened in FrontPage using a http:// location. >>>>>> >>>>>> Components created on a disc-based web will not work. Components >>>>>> published using FTP or to a disc based (folder option) location will >>>>>> not work, even if the web server is running the extensions. HTTP >>>>>> publishing changes the code in the page to point to the correct >>>>>> executables on the server. >>>>>> -- >>>>>> Ron Symonds - Microsoft MVP (Expression) >>>>>> Reply only to group - emails will be deleted unread. >>>>>> http://www.rxs-enterprises.org/fp >>>>>> >>>>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>>>> news:#FrJXwYhJHA.5244@TK2MSFTNGP06.phx.gbl... >>>>>>> Tom >>>>>>> >>>>>>> I used the folder option to publish and the FP server extensions >>>>>>> are installed on the IIS6 server. >>>>>>> >>>>>>> Is there any way to check to make sure the FP extensions are >>>>>>> installed. I just went into control panal add/remove Microsoft then >>>>>>> details on IIS and FP extensions are checked. >>>>>>> >>>>>>> I even did a IIS reset on the IIS6 server >>>>>>> >>>>>>> I looked in the folder _vti_cnf and the file default.htm.cnt file >>>>>>> exists >>>>>>> >>>>>>> somewhere I read something about this folder needs ISUR_SERVER1 >>>>>>> user with write permissions is that correct? >>>>>>> >>>>>>> I tried to give ISUR_SERVER1 user write permissions but the write >>>>>>> persmission box is greyed out under the Deny column >>>>>>> I checked the write box but not sure if the deny is taking over. >>>>>>> >>>>>>> ANy other ideas? >>>>>>> >>>>>>> thanks >>>>>>> >>>>>>> Tom >>>>>>> "Tom [Pepper] Willett" <t**@youreadaisyifyoudo.com> wrote in >>>>>>> message news:OpxC1bYhJHA.1292@TK2MSFTNGP02.phx.gbl... >>>>>>>> Are you http publishing (not FTP) to a server with the FP server >>>>>>>> extensions >>>>>>>> installed? >>>>>>>> -- >>>>>>>> Tom [Pepper] Willett >>>>>>>> Microsoft MVP - FrontPage >>>>>>>> --------------------------- >>>>>>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>>>>>> news:%23d$m3RYhJHA.5000@TK2MSFTNGP04.phx.gbl... >>>>>>>> : Front Page 2003 SP3 >>>>>>>> : IIS6 Windows 2003 R2 Standard DC Server SP2 >>>>>>>> : Windows XP Pro SP3 >>>>>>>> : >>>>>>>> : Just designed a simple default page >>>>>>>> : >>>>>>>> : Two buttons with a hyper link and >>>>>>>> : Hit Counter >>>>>>>> : >>>>>>>> : This was designed on my Windows XP Pro pc with my FP 2003, Then >>>>>>>> I >>>>>>>> published >>>>>>>> : the site on my IIS6 Server >>>>>>>> : >>>>>>>> : When I bring up the web site the hit counter has a RED X >>>>>>>> : >>>>>>>> : What can I be missing ? >>>>>>>> : >>>>>>>> : I have IIS5 on my pc and it fails there also >>>>>>>> : >>>>>>>> : What am I doing wrong? >>>>>>>> : >>>>>>>> : Thanks >>>>>>>> : >>>>>>>> : Tom >>>>>>>> : >>>>>>>> : >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > > Ron
On the server I am using port 80 for my web site Well I deleted it from sharepoint and recreated it back in IIS6 I am unclear on where to extend the site to get FPSE installed The Sharepoint Central Admin web page does not list any web site that is not under the control of WSS I just went into WSS CA extend a web site page in the drop down box I saw my TESTSITE but it wants me to extend and existing Application I have WSS working fine now and I do not want to extend my WSS site which happens to be on port 81 The TESTSITE is a standalone site nothing to do with WSS and IIS6 should be able to handle the FSPE extensions. What if I did not have sharepoint installed FSPE extension would not work either? I am now more confused than ever. It is looking like Frontpage is not designed to publish to a url. The option in FP is not working at all now matter what environment. The only method that works is file transfer. But then Hit Counters will not work when you publish that way. Need help thanks Tom Does Microsoft still support FP? Show quoteHide quote "Ronx" <ronx***@hotmail.com> wrote in message news:%23lvSJQwhJHA.5244@TK2MSFTNGP06.phx.gbl... > The Sharepoint Administrator is for administrating the FP 2002 > extensions - not Sharepoint. Create the site in IIS and use the > Sharepoint Admin to extend the site with FP extensions. > > The extensions will be installed on Port 80 - All your URLs must use port > 80 - not 81 or any other number. > -- > Ron Symonds - Microsoft MVP (Expression) > Reply only to group - emails will be deleted unread. > http://www.rxs-enterprises.org/fp > > "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message > news:OMpz21vhJHA.3444@TK2MSFTNGP03.phx.gbl... >> Ron >> >> Just tried creating the site in WSS CA >> >> Still does not work I see the FPSE files now under the site >> >> I can not connect to the site >> >> Why do we need to do this using Sharepoint? Sharepoint is not an IIS web >> site manager program >> >> IIS6 needs to have the ability to add FPSE to any web site no matter how >> it is created. >> >> If I do a New Web site in IIS6 why can I not get FPSE to work >> >> What do I do now >> >> Tom >> "Ronx" <ronx***@hotmail.com> wrote in message >> news:enn5SNqhJHA.5244@TK2MSFTNGP06.phx.gbl... >>> Have you extended the website? Administration Tasks->Microsoft >>> SharePoint Administrator >>> And have you Allowed FrontPage extensions in the IIS Manager web service >>> extensions section? >>> -- >>> Ron Symonds - Microsoft MVP (Expression) >>> Reply only to group - emails will be deleted unread. >>> http://www.rxs-enterprises.org/fp >>> >>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>> news:unF7QsjhJHA.4028@TK2MSFTNGP03.phx.gbl... >>>> Ronx >>>> >>>> Thanks for your help >>>> I found this KB828909 online and when I searched for the _vti_inf.html >>>> file it was not found hence Frontpage Server extensions not installed. >>>> >>>> But when I went into control panel and windows components applications >>>> IIS details frontpage server extensions are checked off. >>>> >>>> I then uninstalled FPSE and reinstalled FPSE but no luck >>>> >>>> Wonder whats up with Windows 2003 Server >>>> >>>> I even turned off my Kaspersky anti virus and that did not help either >>>> >>>> I did post something on the IIS ng >>>> >>>> If you think of any thing let me know >>>> >>>> Thanks >>>> >>>> Tom >>>> "Ronx" <ronx***@hotmail.com> wrote in message >>>> news:eH7A3JghJHA.5540@TK2MSFTNGP06.phx.gbl... >>>>>I tried windows 2003 R2, and replaced it with Windows 2003 SP1. I >>>>>could not make a web server work with R2. >>>>> Try asking in a server newsgroup, such as >>>>> news://msnews.microsoft.com/microsoft.public.inetserver.iis >>>>> -- >>>>> Ron Symonds - Microsoft MVP (Expression) >>>>> Reply only to group - emails will be deleted unread. >>>>> http://www.rxs-enterprises.org/fp >>>>> >>>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>>> news:uoIRJ4ehJHA.1780@TK2MSFTNGP03.phx.gbl... >>>>>> Ronx >>>>>> >>>>>> Thanks for the info >>>>>> But I posted this one earlier today FRONTPAGE Publishing Newbie on >>>>>> this NG about that >>>>>> >>>>>> I tried publishing in FP using http and it displays message unable to >>>>>> open web site >>>>>> >>>>>> >>>>>> I can get to the web site via http://www.test.com >>>>>> >>>>>> This site is on my Windows 2003 R2 Standard DC server sp2 with IIS6 >>>>>> >>>>>> I have FP 2003 on my Windows XP PRO SP3 pc >>>>>> >>>>>> Any ideas or thoughts >>>>>> >>>>>> Thanks >>>>>> >>>>>> Tom >>>>>> "Ronx" <ronx***@hotmail.com> wrote in message >>>>>> news:eIb9SjdhJHA.5724@TK2MSFTNGP02.phx.gbl... >>>>>>> To make any component that uses the FrontPage extensions work you >>>>>>> either have to publish using http to a server running the extensions >>>>>>> (NOT the folder option) or create the component on the server - >>>>>>> opened in FrontPage using a http:// location. >>>>>>> >>>>>>> Components created on a disc-based web will not work. Components >>>>>>> published using FTP or to a disc based (folder option) location will >>>>>>> not work, even if the web server is running the extensions. HTTP >>>>>>> publishing changes the code in the page to point to the correct >>>>>>> executables on the server. >>>>>>> -- >>>>>>> Ron Symonds - Microsoft MVP (Expression) >>>>>>> Reply only to group - emails will be deleted unread. >>>>>>> http://www.rxs-enterprises.org/fp >>>>>>> >>>>>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>>>>> news:#FrJXwYhJHA.5244@TK2MSFTNGP06.phx.gbl... >>>>>>>> Tom >>>>>>>> >>>>>>>> I used the folder option to publish and the FP server extensions >>>>>>>> are installed on the IIS6 server. >>>>>>>> >>>>>>>> Is there any way to check to make sure the FP extensions are >>>>>>>> installed. I just went into control panal add/remove Microsoft then >>>>>>>> details on IIS and FP extensions are checked. >>>>>>>> >>>>>>>> I even did a IIS reset on the IIS6 server >>>>>>>> >>>>>>>> I looked in the folder _vti_cnf and the file default.htm.cnt file >>>>>>>> exists >>>>>>>> >>>>>>>> somewhere I read something about this folder needs ISUR_SERVER1 >>>>>>>> user with write permissions is that correct? >>>>>>>> >>>>>>>> I tried to give ISUR_SERVER1 user write permissions but the write >>>>>>>> persmission box is greyed out under the Deny column >>>>>>>> I checked the write box but not sure if the deny is taking over. >>>>>>>> >>>>>>>> ANy other ideas? >>>>>>>> >>>>>>>> thanks >>>>>>>> >>>>>>>> Tom >>>>>>>> "Tom [Pepper] Willett" <t**@youreadaisyifyoudo.com> wrote in >>>>>>>> message news:OpxC1bYhJHA.1292@TK2MSFTNGP02.phx.gbl... >>>>>>>>> Are you http publishing (not FTP) to a server with the FP server >>>>>>>>> extensions >>>>>>>>> installed? >>>>>>>>> -- >>>>>>>>> Tom [Pepper] Willett >>>>>>>>> Microsoft MVP - FrontPage >>>>>>>>> --------------------------- >>>>>>>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>>>>>>> news:%23d$m3RYhJHA.5000@TK2MSFTNGP04.phx.gbl... >>>>>>>>> : Front Page 2003 SP3 >>>>>>>>> : IIS6 Windows 2003 R2 Standard DC Server SP2 >>>>>>>>> : Windows XP Pro SP3 >>>>>>>>> : >>>>>>>>> : Just designed a simple default page >>>>>>>>> : >>>>>>>>> : Two buttons with a hyper link and >>>>>>>>> : Hit Counter >>>>>>>>> : >>>>>>>>> : This was designed on my Windows XP Pro pc with my FP 2003, Then >>>>>>>>> I >>>>>>>>> published >>>>>>>>> : the site on my IIS6 Server >>>>>>>>> : >>>>>>>>> : When I bring up the web site the hit counter has a RED X >>>>>>>>> : >>>>>>>>> : What can I be missing ? >>>>>>>>> : >>>>>>>>> : I have IIS5 on my pc and it fails there also >>>>>>>>> : >>>>>>>>> : What am I doing wrong? >>>>>>>>> : >>>>>>>>> : Thanks >>>>>>>>> : >>>>>>>>> : Tom >>>>>>>>> : >>>>>>>>> : >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > > Ronx
I got it yahoo What a bone head I am on this one. You and every one else kept telling me use Sharepoint admin and dumb me was always using sharepoint central administration. Then I did a check in admin tools and saw sharepoint admin and to my amazement there it was my web site ready to be extended. I ran the extension process but it failed. The site I created was under the folder of wwwroot. It did not like that so I had to create my testsite under the root of inetpub The fpse 2002 files all appeared and my site works even the hit counter is working now wow. Just have one question left now How do I publish my files into the root of the new folder I created on my server. Reason I ask is becasue when I published from my pc it created the folder that I had on my pc on the server. now the users would have to type www.testsite.com/testsite would rather have www.testsite.com Thanks for all your help Any ideas on that? Thanks Tom Now off to get my workstation to work for SPFE 2002 and I will be a happy camper Show quoteHide quote "Ronx" <ronx***@hotmail.com> wrote in message news:%23lvSJQwhJHA.5244@TK2MSFTNGP06.phx.gbl... > The Sharepoint Administrator is for administrating the FP 2002 > extensions - not Sharepoint. Create the site in IIS and use the > Sharepoint Admin to extend the site with FP extensions. > > The extensions will be installed on Port 80 - All your URLs must use port > 80 - not 81 or any other number. > -- > Ron Symonds - Microsoft MVP (Expression) > Reply only to group - emails will be deleted unread. > http://www.rxs-enterprises.org/fp > > "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message > news:OMpz21vhJHA.3444@TK2MSFTNGP03.phx.gbl... >> Ron >> >> Just tried creating the site in WSS CA >> >> Still does not work I see the FPSE files now under the site >> >> I can not connect to the site >> >> Why do we need to do this using Sharepoint? Sharepoint is not an IIS web >> site manager program >> >> IIS6 needs to have the ability to add FPSE to any web site no matter how >> it is created. >> >> If I do a New Web site in IIS6 why can I not get FPSE to work >> >> What do I do now >> >> Tom >> "Ronx" <ronx***@hotmail.com> wrote in message >> news:enn5SNqhJHA.5244@TK2MSFTNGP06.phx.gbl... >>> Have you extended the website? Administration Tasks->Microsoft >>> SharePoint Administrator >>> And have you Allowed FrontPage extensions in the IIS Manager web service >>> extensions section? >>> -- >>> Ron Symonds - Microsoft MVP (Expression) >>> Reply only to group - emails will be deleted unread. >>> http://www.rxs-enterprises.org/fp >>> >>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>> news:unF7QsjhJHA.4028@TK2MSFTNGP03.phx.gbl... >>>> Ronx >>>> >>>> Thanks for your help >>>> I found this KB828909 online and when I searched for the _vti_inf.html >>>> file it was not found hence Frontpage Server extensions not installed. >>>> >>>> But when I went into control panel and windows components applications >>>> IIS details frontpage server extensions are checked off. >>>> >>>> I then uninstalled FPSE and reinstalled FPSE but no luck >>>> >>>> Wonder whats up with Windows 2003 Server >>>> >>>> I even turned off my Kaspersky anti virus and that did not help either >>>> >>>> I did post something on the IIS ng >>>> >>>> If you think of any thing let me know >>>> >>>> Thanks >>>> >>>> Tom >>>> "Ronx" <ronx***@hotmail.com> wrote in message >>>> news:eH7A3JghJHA.5540@TK2MSFTNGP06.phx.gbl... >>>>>I tried windows 2003 R2, and replaced it with Windows 2003 SP1. I >>>>>could not make a web server work with R2. >>>>> Try asking in a server newsgroup, such as >>>>> news://msnews.microsoft.com/microsoft.public.inetserver.iis >>>>> -- >>>>> Ron Symonds - Microsoft MVP (Expression) >>>>> Reply only to group - emails will be deleted unread. >>>>> http://www.rxs-enterprises.org/fp >>>>> >>>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>>> news:uoIRJ4ehJHA.1780@TK2MSFTNGP03.phx.gbl... >>>>>> Ronx >>>>>> >>>>>> Thanks for the info >>>>>> But I posted this one earlier today FRONTPAGE Publishing Newbie on >>>>>> this NG about that >>>>>> >>>>>> I tried publishing in FP using http and it displays message unable to >>>>>> open web site >>>>>> >>>>>> >>>>>> I can get to the web site via http://www.test.com >>>>>> >>>>>> This site is on my Windows 2003 R2 Standard DC server sp2 with IIS6 >>>>>> >>>>>> I have FP 2003 on my Windows XP PRO SP3 pc >>>>>> >>>>>> Any ideas or thoughts >>>>>> >>>>>> Thanks >>>>>> >>>>>> Tom >>>>>> "Ronx" <ronx***@hotmail.com> wrote in message >>>>>> news:eIb9SjdhJHA.5724@TK2MSFTNGP02.phx.gbl... >>>>>>> To make any component that uses the FrontPage extensions work you >>>>>>> either have to publish using http to a server running the extensions >>>>>>> (NOT the folder option) or create the component on the server - >>>>>>> opened in FrontPage using a http:// location. >>>>>>> >>>>>>> Components created on a disc-based web will not work. Components >>>>>>> published using FTP or to a disc based (folder option) location will >>>>>>> not work, even if the web server is running the extensions. HTTP >>>>>>> publishing changes the code in the page to point to the correct >>>>>>> executables on the server. >>>>>>> -- >>>>>>> Ron Symonds - Microsoft MVP (Expression) >>>>>>> Reply only to group - emails will be deleted unread. >>>>>>> http://www.rxs-enterprises.org/fp >>>>>>> >>>>>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>>>>> news:#FrJXwYhJHA.5244@TK2MSFTNGP06.phx.gbl... >>>>>>>> Tom >>>>>>>> >>>>>>>> I used the folder option to publish and the FP server extensions >>>>>>>> are installed on the IIS6 server. >>>>>>>> >>>>>>>> Is there any way to check to make sure the FP extensions are >>>>>>>> installed. I just went into control panal add/remove Microsoft then >>>>>>>> details on IIS and FP extensions are checked. >>>>>>>> >>>>>>>> I even did a IIS reset on the IIS6 server >>>>>>>> >>>>>>>> I looked in the folder _vti_cnf and the file default.htm.cnt file >>>>>>>> exists >>>>>>>> >>>>>>>> somewhere I read something about this folder needs ISUR_SERVER1 >>>>>>>> user with write permissions is that correct? >>>>>>>> >>>>>>>> I tried to give ISUR_SERVER1 user write permissions but the write >>>>>>>> persmission box is greyed out under the Deny column >>>>>>>> I checked the write box but not sure if the deny is taking over. >>>>>>>> >>>>>>>> ANy other ideas? >>>>>>>> >>>>>>>> thanks >>>>>>>> >>>>>>>> Tom >>>>>>>> "Tom [Pepper] Willett" <t**@youreadaisyifyoudo.com> wrote in >>>>>>>> message news:OpxC1bYhJHA.1292@TK2MSFTNGP02.phx.gbl... >>>>>>>>> Are you http publishing (not FTP) to a server with the FP server >>>>>>>>> extensions >>>>>>>>> installed? >>>>>>>>> -- >>>>>>>>> Tom [Pepper] Willett >>>>>>>>> Microsoft MVP - FrontPage >>>>>>>>> --------------------------- >>>>>>>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>>>>>>> news:%23d$m3RYhJHA.5000@TK2MSFTNGP04.phx.gbl... >>>>>>>>> : Front Page 2003 SP3 >>>>>>>>> : IIS6 Windows 2003 R2 Standard DC Server SP2 >>>>>>>>> : Windows XP Pro SP3 >>>>>>>>> : >>>>>>>>> : Just designed a simple default page >>>>>>>>> : >>>>>>>>> : Two buttons with a hyper link and >>>>>>>>> : Hit Counter >>>>>>>>> : >>>>>>>>> : This was designed on my Windows XP Pro pc with my FP 2003, Then >>>>>>>>> I >>>>>>>>> published >>>>>>>>> : the site on my IIS6 Server >>>>>>>>> : >>>>>>>>> : When I bring up the web site the hit counter has a RED X >>>>>>>>> : >>>>>>>>> : What can I be missing ? >>>>>>>>> : >>>>>>>>> : I have IIS5 on my pc and it fails there also >>>>>>>>> : >>>>>>>>> : What am I doing wrong? >>>>>>>>> : >>>>>>>>> : Thanks >>>>>>>>> : >>>>>>>>> : Tom >>>>>>>>> : >>>>>>>>> : >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > > You create a new website on the server.
Make a new folder (use Windows Explorer) In the IIS MMC expand the tree on the left, right click on websites folder and choose New website In the property sheets point the website to the new folder, and either set host headers or a new IP address to point to the site. Any new IP address will have to be set up in Networking on the server, and DNS entries made for it as well. This is a post for the server groups and forums. Or read all the help in the IIS MMC. -- Show quoteHide quoteRon Symonds - Microsoft MVP (Expression) Reply only to group - emails will be deleted unread. http://www.rxs-enterprises.org/fp "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message news:OIzD6fxhJHA.760@TK2MSFTNGP03.phx.gbl... > Ronx > > I got it yahoo > > What a bone head I am on this one. You and every one else kept telling me > use Sharepoint admin and dumb me was always using sharepoint central > administration. > > Then I did a check in admin tools and saw sharepoint admin and to my > amazement there it was my web site ready to be extended. > > I ran the extension process but it failed. The site I created was under > the folder of wwwroot. It did not like that so I had to create my > testsite under the root of inetpub > > The fpse 2002 files all appeared and my site works even the hit counter > is working now wow. > > Just have one question left now > > How do I publish my files into the root of the new folder I created on my > server. Reason I ask is becasue when I published from my pc it created > the folder that I had on my pc on the server. now the users would have to > type www.testsite.com/testsite > > would rather have www.testsite.com > > > Thanks for all your help > > > Any ideas on that? > > Thanks > > Tom > > Now off to get my workstation to work for SPFE 2002 and I will be a happy > camper > > > "Ronx" <ronx***@hotmail.com> wrote in message > news:%23lvSJQwhJHA.5244@TK2MSFTNGP06.phx.gbl... >> The Sharepoint Administrator is for administrating the FP 2002 >> extensions - not Sharepoint. Create the site in IIS and use the >> Sharepoint Admin to extend the site with FP extensions. >> >> The extensions will be installed on Port 80 - All your URLs must use >> port 80 - not 81 or any other number. >> -- >> Ron Symonds - Microsoft MVP (Expression) >> Reply only to group - emails will be deleted unread. >> http://www.rxs-enterprises.org/fp >> >> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >> news:OMpz21vhJHA.3444@TK2MSFTNGP03.phx.gbl... >>> Ron >>> >>> Just tried creating the site in WSS CA >>> >>> Still does not work I see the FPSE files now under the site >>> >>> I can not connect to the site >>> >>> Why do we need to do this using Sharepoint? Sharepoint is not an IIS >>> web site manager program >>> >>> IIS6 needs to have the ability to add FPSE to any web site no matter >>> how it is created. >>> >>> If I do a New Web site in IIS6 why can I not get FPSE to work >>> >>> What do I do now >>> >>> Tom >>> "Ronx" <ronx***@hotmail.com> wrote in message >>> news:enn5SNqhJHA.5244@TK2MSFTNGP06.phx.gbl... >>>> Have you extended the website? Administration Tasks->Microsoft >>>> SharePoint Administrator >>>> And have you Allowed FrontPage extensions in the IIS Manager web >>>> service extensions section? >>>> -- >>>> Ron Symonds - Microsoft MVP (Expression) >>>> Reply only to group - emails will be deleted unread. >>>> http://www.rxs-enterprises.org/fp >>>> >>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>> news:unF7QsjhJHA.4028@TK2MSFTNGP03.phx.gbl... >>>>> Ronx >>>>> >>>>> Thanks for your help >>>>> I found this KB828909 online and when I searched for the >>>>> _vti_inf.html file it was not found hence Frontpage Server extensions >>>>> not installed. >>>>> >>>>> But when I went into control panel and windows components >>>>> applications IIS details frontpage server extensions are checked off. >>>>> >>>>> I then uninstalled FPSE and reinstalled FPSE but no luck >>>>> >>>>> Wonder whats up with Windows 2003 Server >>>>> >>>>> I even turned off my Kaspersky anti virus and that did not help >>>>> either >>>>> >>>>> I did post something on the IIS ng >>>>> >>>>> If you think of any thing let me know >>>>> >>>>> Thanks >>>>> >>>>> Tom >>>>> "Ronx" <ronx***@hotmail.com> wrote in message >>>>> news:eH7A3JghJHA.5540@TK2MSFTNGP06.phx.gbl... >>>>>>I tried windows 2003 R2, and replaced it with Windows 2003 SP1. I >>>>>>could not make a web server work with R2. >>>>>> Try asking in a server newsgroup, such as >>>>>> news://msnews.microsoft.com/microsoft.public.inetserver.iis >>>>>> -- >>>>>> Ron Symonds - Microsoft MVP (Expression) >>>>>> Reply only to group - emails will be deleted unread. >>>>>> http://www.rxs-enterprises.org/fp >>>>>> >>>>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>>>> news:uoIRJ4ehJHA.1780@TK2MSFTNGP03.phx.gbl... >>>>>>> Ronx >>>>>>> >>>>>>> Thanks for the info >>>>>>> But I posted this one earlier today FRONTPAGE Publishing Newbie on >>>>>>> this NG about that >>>>>>> >>>>>>> I tried publishing in FP using http and it displays message unable >>>>>>> to open web site >>>>>>> >>>>>>> >>>>>>> I can get to the web site via http://www.test.com >>>>>>> >>>>>>> This site is on my Windows 2003 R2 Standard DC server sp2 with IIS6 >>>>>>> >>>>>>> I have FP 2003 on my Windows XP PRO SP3 pc >>>>>>> >>>>>>> Any ideas or thoughts >>>>>>> >>>>>>> Thanks >>>>>>> >>>>>>> Tom >>>>>>> "Ronx" <ronx***@hotmail.com> wrote in message >>>>>>> news:eIb9SjdhJHA.5724@TK2MSFTNGP02.phx.gbl... >>>>>>>> To make any component that uses the FrontPage extensions work you >>>>>>>> either have to publish using http to a server running the >>>>>>>> extensions (NOT the folder option) or create the component on the >>>>>>>> server - opened in FrontPage using a http:// location. >>>>>>>> >>>>>>>> Components created on a disc-based web will not work. Components >>>>>>>> published using FTP or to a disc based (folder option) location >>>>>>>> will not work, even if the web server is running the extensions. >>>>>>>> HTTP publishing changes the code in the page to point to the >>>>>>>> correct executables on the server. >>>>>>>> -- >>>>>>>> Ron Symonds - Microsoft MVP (Expression) >>>>>>>> Reply only to group - emails will be deleted unread. >>>>>>>> http://www.rxs-enterprises.org/fp >>>>>>>> >>>>>>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>>>>>> news:#FrJXwYhJHA.5244@TK2MSFTNGP06.phx.gbl... >>>>>>>>> Tom >>>>>>>>> >>>>>>>>> I used the folder option to publish and the FP server extensions >>>>>>>>> are installed on the IIS6 server. >>>>>>>>> >>>>>>>>> Is there any way to check to make sure the FP extensions are >>>>>>>>> installed. I just went into control panal add/remove Microsoft >>>>>>>>> then details on IIS and FP extensions are checked. >>>>>>>>> >>>>>>>>> I even did a IIS reset on the IIS6 server >>>>>>>>> >>>>>>>>> I looked in the folder _vti_cnf and the file default.htm.cnt file >>>>>>>>> exists >>>>>>>>> >>>>>>>>> somewhere I read something about this folder needs ISUR_SERVER1 >>>>>>>>> user with write permissions is that correct? >>>>>>>>> >>>>>>>>> I tried to give ISUR_SERVER1 user write permissions but the write >>>>>>>>> persmission box is greyed out under the Deny column >>>>>>>>> I checked the write box but not sure if the deny is taking over. >>>>>>>>> >>>>>>>>> ANy other ideas? >>>>>>>>> >>>>>>>>> thanks >>>>>>>>> >>>>>>>>> Tom >>>>>>>>> "Tom [Pepper] Willett" <t**@youreadaisyifyoudo.com> wrote in >>>>>>>>> message news:OpxC1bYhJHA.1292@TK2MSFTNGP02.phx.gbl... >>>>>>>>>> Are you http publishing (not FTP) to a server with the FP server >>>>>>>>>> extensions >>>>>>>>>> installed? >>>>>>>>>> -- >>>>>>>>>> Tom [Pepper] Willett >>>>>>>>>> Microsoft MVP - FrontPage >>>>>>>>>> --------------------------- >>>>>>>>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>>>>>>>> news:%23d$m3RYhJHA.5000@TK2MSFTNGP04.phx.gbl... >>>>>>>>>> : Front Page 2003 SP3 >>>>>>>>>> : IIS6 Windows 2003 R2 Standard DC Server SP2 >>>>>>>>>> : Windows XP Pro SP3 >>>>>>>>>> : >>>>>>>>>> : Just designed a simple default page >>>>>>>>>> : >>>>>>>>>> : Two buttons with a hyper link and >>>>>>>>>> : Hit Counter >>>>>>>>>> : >>>>>>>>>> : This was designed on my Windows XP Pro pc with my FP 2003, >>>>>>>>>> Then I >>>>>>>>>> published >>>>>>>>>> : the site on my IIS6 Server >>>>>>>>>> : >>>>>>>>>> : When I bring up the web site the hit counter has a RED X >>>>>>>>>> : >>>>>>>>>> : What can I be missing ? >>>>>>>>>> : >>>>>>>>>> : I have IIS5 on my pc and it fails there also >>>>>>>>>> : >>>>>>>>>> : What am I doing wrong? >>>>>>>>>> : >>>>>>>>>> : Thanks >>>>>>>>>> : >>>>>>>>>> : Tom >>>>>>>>>> : >>>>>>>>>> : >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > > Ronx
Thanks You must publish from the exact same folder that is on the web site For some reason FP will publish the entire path from test site. I know what to do now thanks I did recreate the site anyway to get a clean start Thanks Tom Show quoteHide quote "Ronx" <ronx***@hotmail.com> wrote in message news:%23NbOOe2hJHA.4880@TK2MSFTNGP02.phx.gbl... > You create a new website on the server. > Make a new folder (use Windows Explorer) > In the IIS MMC expand the tree on the left, right click on websites folder > and choose New website > In the property sheets point the website to the new folder, and either set > host headers or a new IP address to point to the site. > Any new IP address will have to be set up in Networking on the server, and > DNS entries made for it as well. > > This is a post for the server groups and forums. Or read all the help in > the IIS MMC. > > -- > Ron Symonds - Microsoft MVP (Expression) > Reply only to group - emails will be deleted unread. > http://www.rxs-enterprises.org/fp > > "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message > news:OIzD6fxhJHA.760@TK2MSFTNGP03.phx.gbl... >> Ronx >> >> I got it yahoo >> >> What a bone head I am on this one. You and every one else kept telling me >> use Sharepoint admin and dumb me was always using sharepoint central >> administration. >> >> Then I did a check in admin tools and saw sharepoint admin and to my >> amazement there it was my web site ready to be extended. >> >> I ran the extension process but it failed. The site I created was under >> the folder of wwwroot. It did not like that so I had to create my >> testsite under the root of inetpub >> >> The fpse 2002 files all appeared and my site works even the hit counter >> is working now wow. >> >> Just have one question left now >> >> How do I publish my files into the root of the new folder I created on my >> server. Reason I ask is becasue when I published from my pc it created >> the folder that I had on my pc on the server. now the users would have to >> type www.testsite.com/testsite >> >> would rather have www.testsite.com >> >> >> Thanks for all your help >> >> >> Any ideas on that? >> >> Thanks >> >> Tom >> >> Now off to get my workstation to work for SPFE 2002 and I will be a happy >> camper >> >> >> "Ronx" <ronx***@hotmail.com> wrote in message >> news:%23lvSJQwhJHA.5244@TK2MSFTNGP06.phx.gbl... >>> The Sharepoint Administrator is for administrating the FP 2002 >>> extensions - not Sharepoint. Create the site in IIS and use the >>> Sharepoint Admin to extend the site with FP extensions. >>> >>> The extensions will be installed on Port 80 - All your URLs must use >>> port 80 - not 81 or any other number. >>> -- >>> Ron Symonds - Microsoft MVP (Expression) >>> Reply only to group - emails will be deleted unread. >>> http://www.rxs-enterprises.org/fp >>> >>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>> news:OMpz21vhJHA.3444@TK2MSFTNGP03.phx.gbl... >>>> Ron >>>> >>>> Just tried creating the site in WSS CA >>>> >>>> Still does not work I see the FPSE files now under the site >>>> >>>> I can not connect to the site >>>> >>>> Why do we need to do this using Sharepoint? Sharepoint is not an IIS >>>> web site manager program >>>> >>>> IIS6 needs to have the ability to add FPSE to any web site no matter >>>> how it is created. >>>> >>>> If I do a New Web site in IIS6 why can I not get FPSE to work >>>> >>>> What do I do now >>>> >>>> Tom >>>> "Ronx" <ronx***@hotmail.com> wrote in message >>>> news:enn5SNqhJHA.5244@TK2MSFTNGP06.phx.gbl... >>>>> Have you extended the website? Administration Tasks->Microsoft >>>>> SharePoint Administrator >>>>> And have you Allowed FrontPage extensions in the IIS Manager web >>>>> service extensions section? >>>>> -- >>>>> Ron Symonds - Microsoft MVP (Expression) >>>>> Reply only to group - emails will be deleted unread. >>>>> http://www.rxs-enterprises.org/fp >>>>> >>>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>>> news:unF7QsjhJHA.4028@TK2MSFTNGP03.phx.gbl... >>>>>> Ronx >>>>>> >>>>>> Thanks for your help >>>>>> I found this KB828909 online and when I searched for the >>>>>> _vti_inf.html file it was not found hence Frontpage Server extensions >>>>>> not installed. >>>>>> >>>>>> But when I went into control panel and windows components >>>>>> applications IIS details frontpage server extensions are checked off. >>>>>> >>>>>> I then uninstalled FPSE and reinstalled FPSE but no luck >>>>>> >>>>>> Wonder whats up with Windows 2003 Server >>>>>> >>>>>> I even turned off my Kaspersky anti virus and that did not help >>>>>> either >>>>>> >>>>>> I did post something on the IIS ng >>>>>> >>>>>> If you think of any thing let me know >>>>>> >>>>>> Thanks >>>>>> >>>>>> Tom >>>>>> "Ronx" <ronx***@hotmail.com> wrote in message >>>>>> news:eH7A3JghJHA.5540@TK2MSFTNGP06.phx.gbl... >>>>>>>I tried windows 2003 R2, and replaced it with Windows 2003 SP1. I >>>>>>>could not make a web server work with R2. >>>>>>> Try asking in a server newsgroup, such as >>>>>>> news://msnews.microsoft.com/microsoft.public.inetserver.iis >>>>>>> -- >>>>>>> Ron Symonds - Microsoft MVP (Expression) >>>>>>> Reply only to group - emails will be deleted unread. >>>>>>> http://www.rxs-enterprises.org/fp >>>>>>> >>>>>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>>>>> news:uoIRJ4ehJHA.1780@TK2MSFTNGP03.phx.gbl... >>>>>>>> Ronx >>>>>>>> >>>>>>>> Thanks for the info >>>>>>>> But I posted this one earlier today FRONTPAGE Publishing Newbie on >>>>>>>> this NG about that >>>>>>>> >>>>>>>> I tried publishing in FP using http and it displays message unable >>>>>>>> to open web site >>>>>>>> >>>>>>>> >>>>>>>> I can get to the web site via http://www.test.com >>>>>>>> >>>>>>>> This site is on my Windows 2003 R2 Standard DC server sp2 with IIS6 >>>>>>>> >>>>>>>> I have FP 2003 on my Windows XP PRO SP3 pc >>>>>>>> >>>>>>>> Any ideas or thoughts >>>>>>>> >>>>>>>> Thanks >>>>>>>> >>>>>>>> Tom >>>>>>>> "Ronx" <ronx***@hotmail.com> wrote in message >>>>>>>> news:eIb9SjdhJHA.5724@TK2MSFTNGP02.phx.gbl... >>>>>>>>> To make any component that uses the FrontPage extensions work you >>>>>>>>> either have to publish using http to a server running the >>>>>>>>> extensions (NOT the folder option) or create the component on the >>>>>>>>> server - opened in FrontPage using a http:// location. >>>>>>>>> >>>>>>>>> Components created on a disc-based web will not work. Components >>>>>>>>> published using FTP or to a disc based (folder option) location >>>>>>>>> will not work, even if the web server is running the extensions. >>>>>>>>> HTTP publishing changes the code in the page to point to the >>>>>>>>> correct executables on the server. >>>>>>>>> -- >>>>>>>>> Ron Symonds - Microsoft MVP (Expression) >>>>>>>>> Reply only to group - emails will be deleted unread. >>>>>>>>> http://www.rxs-enterprises.org/fp >>>>>>>>> >>>>>>>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>>>>>>> news:#FrJXwYhJHA.5244@TK2MSFTNGP06.phx.gbl... >>>>>>>>>> Tom >>>>>>>>>> >>>>>>>>>> I used the folder option to publish and the FP server extensions >>>>>>>>>> are installed on the IIS6 server. >>>>>>>>>> >>>>>>>>>> Is there any way to check to make sure the FP extensions are >>>>>>>>>> installed. I just went into control panal add/remove Microsoft >>>>>>>>>> then details on IIS and FP extensions are checked. >>>>>>>>>> >>>>>>>>>> I even did a IIS reset on the IIS6 server >>>>>>>>>> >>>>>>>>>> I looked in the folder _vti_cnf and the file default.htm.cnt file >>>>>>>>>> exists >>>>>>>>>> >>>>>>>>>> somewhere I read something about this folder needs ISUR_SERVER1 >>>>>>>>>> user with write permissions is that correct? >>>>>>>>>> >>>>>>>>>> I tried to give ISUR_SERVER1 user write permissions but the write >>>>>>>>>> persmission box is greyed out under the Deny column >>>>>>>>>> I checked the write box but not sure if the deny is taking over. >>>>>>>>>> >>>>>>>>>> ANy other ideas? >>>>>>>>>> >>>>>>>>>> thanks >>>>>>>>>> >>>>>>>>>> Tom >>>>>>>>>> "Tom [Pepper] Willett" <t**@youreadaisyifyoudo.com> wrote in >>>>>>>>>> message news:OpxC1bYhJHA.1292@TK2MSFTNGP02.phx.gbl... >>>>>>>>>>> Are you http publishing (not FTP) to a server with the FP server >>>>>>>>>>> extensions >>>>>>>>>>> installed? >>>>>>>>>>> -- >>>>>>>>>>> Tom [Pepper] Willett >>>>>>>>>>> Microsoft MVP - FrontPage >>>>>>>>>>> --------------------------- >>>>>>>>>>> "Thomas R Grassi Jr" <thomasgra***@hotmail.com> wrote in message >>>>>>>>>>> news:%23d$m3RYhJHA.5000@TK2MSFTNGP04.phx.gbl... >>>>>>>>>>> : Front Page 2003 SP3 >>>>>>>>>>> : IIS6 Windows 2003 R2 Standard DC Server SP2 >>>>>>>>>>> : Windows XP Pro SP3 >>>>>>>>>>> : >>>>>>>>>>> : Just designed a simple default page >>>>>>>>>>> : >>>>>>>>>>> : Two buttons with a hyper link and >>>>>>>>>>> : Hit Counter >>>>>>>>>>> : >>>>>>>>>>> : This was designed on my Windows XP Pro pc with my FP 2003, >>>>>>>>>>> Then I >>>>>>>>>>> published >>>>>>>>>>> : the site on my IIS6 Server >>>>>>>>>>> : >>>>>>>>>>> : When I bring up the web site the hit counter has a RED X >>>>>>>>>>> : >>>>>>>>>>> : What can I be missing ? >>>>>>>>>>> : >>>>>>>>>>> : I have IIS5 on my pc and it fails there also >>>>>>>>>>> : >>>>>>>>>>> : What am I doing wrong? >>>>>>>>>>> : >>>>>>>>>>> : Thanks >>>>>>>>>>> : >>>>>>>>>>> : Tom >>>>>>>>>>> : >>>>>>>>>>> : >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > >  
Other interesting topics
Okay, what now?? Cannot publish
DBRW link to frontpage form Painfully slow processing forms in FRONTPAGE Really screwy password problem how do i set up a film strip in Frontpage? Can FTP but cannot publish -- do I need the FP extensions?? Publishing question Making One Field Required Based on Previous cgo-bin question Downloading Data? |
|||||||||||||||||||||||
